| Result pages: |
 |
1 |
2 |
3 |
4 |
5 |
6 |
 |
|
See details
|
MyChron Expansion
MyChron Expansion is the new channel multiplier improving MyChron4 and MyChron4 2T performances, thanks to four additional channels and a further connector for the CAN bus.
Through this last connector MyChron4 can be connected to another AIM system (LCU Lambda controller, GPS, SmartyCam th...
Our price: $249.95
|
|
See details
|
Copperhead #219 Kart Chain - 114 Link
Looking for an incredibly durable HIGH QUALITY non-o'ring chain? Look no further! These will definately outlast the sprockets! Made by the HTK...a cheaper alternative to the HTK Panther.
Our price: $48.95
|
|
See details
|
Frame Guard - SMALL
This is the smaller / thinner version of the Disc Saver. More clearance to run the chassis in the low position. 15mm (0.6") thick - Will keep the chassis off the ground by this amount.
Our price: $12.95
|
|
See details
|
OMP Transparent Rain Suit
1-piece Rainproof suit made of 0,20 mm transparent PVC. Other features include: elastic wrist and ankle cuffs, elastic waist band, zippered front and collar with Velcro® closure. Heat welded seams.
Our price: $74.95
|
|
See details
|
Eagle Eye Laser Chain Alignment Tool
No more messing around with straight edges or line of sight. The chain wheel aligner slips onto your rear sprocket for a quick and accurate hands free adjustment. Extend the life of your chain and sprocket and ensure all your power is going where you want.......the rear wheels! (Fits 4mm thick sp...
Our price: $72.95
|
|
See details
|
Piston Stop - Aluminum
This piston stop tool screws into the spark plug hole. Bringing the piston gently up against it will lock the engine in place to prevent it from turning over while working on the engine. Machined from aluminum with a plastic tip to prevent damage to the piston. Fits virtually all engines with a 1...
Our price: $15.95
|
|
See details
|
Eagle Eye Magtronic Rear Laser Alignment System
Fast fitting magnet technology allows you to square your kart in minutes. Fits onto any axle size for fast checking of bend, twist and crab. Works in conjunction with the Magtronic front units for all round peace of mind or as a stand-alone unit. Works with all previous Eagle eye models....
Our price: $498.95
|
|
See details
|
SwedeTech RS125 5 Degree Boot
SwedeTech designed intake boot to replace the Honda " 5 Degree " manifold that is used in the Stock Moto CR125 class. This is not our popular straight intake system for the modified engines. Legal for WKA Stock Moto, Central States Super Series (CSSS), Southwest Regional Cup series, and TaG USA...
Our price: $109.99
|
|
See details
|
Swedetech CR125 CDI Mount
The new Swedetech CR125 mount secures the CDI straight to the engine, eliminating the need to extend the wires. Easy access to the oil level plug as well. Rubber CDI holder not included (Normally included with the engine).
Our price: $24.99
|
|
See details
|
Shockwave Hub Spacer Kit - 40mm
Ever had a rear hub slide in? The kart doesn't handle very well when that happens, does it?
Well, we have a solution for you. Simply slide one of these plastic spacers into your hub before installing it onto the axle, and then slide the hub all the way in until it stops. That way, the hub ...
Our price: $17.00
|
|
See details
|
Akrapovic Rubber Isolated Exhaust Spring - 80mm
BY FAR the best exhaust springs available. High quality stainless steel, swiveled ends, rubber isolated to keep springs from vibrating and breaking from fatigue. Fatigue from vibration is the main cause is spring failure. Unfortunately, only available in 80mm End to End. Works perfect on RCE T3 a...
Our price: $5.95
|
|
See details
|
Bux Circlip Tool - 14mm
Makes installing circlips an ABSOLUTE breeze without any chance of damaging or losing the circlip! For Parilla Leopard, PRD Fireball, HPV, CR80, etc.
Our price: $39.95
|
|
See details
|
Bux Circlip Tool - 15mm
Makes installing circlips an ABSOLUTE breeze without any chance of damaging or losing the circlip! For Rotax Max, Honda CR125, most 125 moto engines, TM K9, TM KZ, ICC, etc.
Our price: $39.95
|
|
See details
|
Redline 2-Cycle KART Premix Oil - 16_oz
This product is very popular in kart racing for its low friction, clean-burning characteristics, lack of engine wear, and ease of tuning. Due to its efficient nature, racers sometimes choose to use less oil in their fuel mixtures than with other products.
Our price: $10.95
|
|
See details
|
Moose Magnetic Drain Plug - CR80 / CR125
Prolong engine life and save on costly repairs with an oil plug that picks up metal filings
Must use washer provided
Predrilled for safety wire
Compare with original OEM plug before installing
Our price: $11.95
|
|
See details
|
Motion Pro Torque Wrench Adapter
Chrome-vanadium tool steel with hard nickel pewter finish
Properly torque two-stroke cylinder base nuts and hard-to-reach fasteners
Fits 12 and 14mm nuts and bolts
Extends the reach of any 3/8 inch drive torque wrench by 3 inches
Chart suppl...
Our price: $14.95
|
|
See details
|
Italkart Rear Bumper Bolt - NEW STYLE
This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
Our price: $17.95
|
|
See details
|
Italkart Rear Bumper Bolt Kit - New Style
This new style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts. Available in 28, 30 or 32mm. (Sold Individually)
Our price: $25.95
|
|
See details
|
Pro Circuit R-304 Silencer
The R-304 silencer's compact aluminum design offers optimum performance. Features high quality stainless steel endcaps with hex head screws to secure the inlet cap which could be removed easily for quick re-packing of the silencer. Fits RLV R2/R4, RCE T3 and any pipe with a 1.0" stinger. 2.75" D...
Our price: $102.95
|
|
See details
|
Powder Coated Lead Weight - White - 10 Pound
High quality, durable powder coated lead weights used as ballast to meet the minimum weight. Most organizations now require all weight to be white.
Weights are predrilled for an 8mm bolt.
NOTE: Anything more than about 10 ...
Our price: $25.00
|
|
See details
|
Powder Coated Lead Weight - White - 3 pound
High quality, durable powder coated lead weights used as ballast to meet the minimum weight. Most organizations now require all weight to be white.
Weights are predrilled for an 8mm bolt.
NOTE: Anything more than about 10 ...
Our price: $8.00
|
|
See details
|
Powder Coated Lead Weight - White - 5 Pound
High quality, durable powder coated lead weights used as ballast to meet the minimum weight. Most organizations now require all weight to be white.
Weights are predrilled for an 8mm bolt.
NOTE: Anything more than about 10 ...
Our price: $12.50
|
|
|
