|
See details
|
MTE SAFTBLOK Drill Jig
Safely and easily drill bolts for safety wire with the MTE SAFTBLOK.
Select between Metric & American thread.
Metric: 6mm-8mm and 10mm
American: 1/4, 5/16 and 3/8 National Fine an...
Our price: $29.95
|
|
See details
|
PRD 3rd Bearing Support Kit
Reduces the chance of bending the $150+ crankhalf when breaking a chain, bending an axle or dropping a wheel. All parts fit into the existing clutch guard.
Kit includes bearing, clip and starter nut.
NOTE: Check rule...
Our price: $25.95
|
|
See details
|
Motion Pro Professional Tire Pressure Gauge 2.5" 0-30 psi
Pressure range of 0-30 psi is ideal for checking off road motorcycle tires
High quality liquid filled 2.5 in. dial gauge with protective rubber boot
Accurate to plus/minus 1.5 percent of maximum gauge reading
Blue anodized 6061 T-6 body with pressure rel...
Our price: $76.95
|
|
See details
|
Hegar RCE Silencer Mounting Kit
The RCE stainless steel silencer mount by Hegar bolts to stock Honda CR 125 and rotates with engine making chain adjustments a breeze. Comes complete with bracket, cradle and band clamps. This mount works with any 3" diameter silencer, but must be used with the RCE T3 pipe.
Our price: $44.95
|
|
See details
|
Tillotson Billet Aluminum Low Speed Tee
Bolt-on low speed billet aluminum tee for easy adjustments. No need to braze on a washer. Installs in seconds with a couple set screws. Machined aluminum finish. Carb not included.
Our price: $17.95
|
|
See details
|
CR80 / CR85 O-Ring Exhaust Manifold
Eliminates leaks, no more RTV!!! High quality alloy steel for durability. Viton O-rings for better heat resistance, durability, and sealing over traditional O-rings. Dual spring mounting holes for better sealing. In addition to providing far superior sealing than stock, this manifold will not wea...
Our price: $28.95
|
|
See details
|
Odenthal EZ Set - 4-Stroke Mount (Clamps INCLUDED)
Odenthal EZ Set Briggs mount for 28mm, 30mm & 32mm diameter. 2-piece motor mount machined from billet 6061 aluminum. The 2-piece design with the solid upper mount was engineered to eliminate motor block distortion under acceleration due to chassis flex. Fits: all F200 motors, Honda ...
Our price: $184.95
|
|
See details
|
Grey Rubber Isolated Exhaust Spring
Swiveled ends, stainless steel and rubber isolated to keep springs from vibrating and breaking from fatigue. Fatigue from vibration is the main cause is spring failure. Springs are measured "hook to hook" and stretch approximately 25-30%. Depending on the size, springs are branded M4 or Yosh...
Our price: $5.95
|
|
See details
|
Computech #1000 - RaceAir Pro
A must have tool for jetting shifter karts, Rotax or anything that uses a Mikuni, Keihin or Dellorto carb! Gets the jetting right in the ball park, regardless of weather condition, elevation, etc. or where you race. It may be a bit pricey but a whole lot cheaper than fixing your motor after it's ...
Our price: $448.95
|
|
See details
|
Battery Tender Junior 12V @ 0.75A
The Battery Tender Junior is much more than a trickle charger. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are!
Our price: $30.95
|
|
See details
|
Engine Ice Hi-Performance Coolant
Features
Ready-to-use premix of coolant and deionized water
Protects from -27°F to 256°F and reduces operating race temperatures by as much as 50°F
Biodegradable, phosphate-free and nontoxic
Our price: $18.95
|
|
See details
|
3M Double Lock Velcro - Per Foot
With 250 mushroom-shaped heads per square inch, there's no need for separate hook and loop pieces. This UV-resistant polyolefin material attaches to itself for a secure hold. Apply above +68° F.
Our price: $5.95
|
|
See details
|
Wiseco RS125 Shifter Kart Piston
Wiseco RS125 pistons are an excellent alternative to the factory HRC RS125 piston kits. Electra coated, improved pin bore wear and resistance to micro welding of the ring and ring groove. Complete with ring, two clips and wrist pin.
Our price: $142.95
|
|
See details
|
2-Channel Fuel Line Clip
Secure the Supply & Return line on shifter karts to the seat, floorpan or anywhere neccesary. Fuel line is secured in place and eliminates any chance of the fuel line getting pinched. Fit's 3/16 to 1/4" fuel line. Hardware included to mount to the seat. Black Only.
Our price: $2.75
|
|
|
