Home :: Engine Parts :: Engine Mounts :: Engine Mounts - 4-Stroke Mounts (Briggs, Clones, etc.)

Engine Mounts - 4-Stroke Mounts (Briggs, Clones, etc.)

Products

Odenthal EZ Set - 4-Stroke, 8 Degree Mount, Universal (Clamps NOT Included)
Odenthal EZ Set - 4-Stroke, 8 Degree Mount, Universal (Clamps NOT Included)
Briggs Racing recommended for LO206. Odenthal EZ Set Briggs mount for 28mm, 30mm & 32mm diameter. 2-piece motor mount machined from billet 6061 aluminum. See detailed pic of the latest top plate.
$179.00
Select Clamps:
Qty
Odenthal EZ Set - 4-Stroke, 8 Degree Mount, EURO Frame Specific (Clamps NOT Included)
Odenthal EZ Set - 4-Stroke, 8 Degree Mount, EURO Frame Specific (Clamps NOT Included)
Briggs Racing recommended for LO206. Latest Odenthal EZ mount made SPECIFICALLY for 30x92mm OR 30x90mm (CRG) karts. Clamps NOT included.
$186.00
Diameter & Spacing
Select Clamps:
Qty
Odenthal EZ EURO Base Mount ONLY (Clamps NOT Included)
Latest Odenthal EZ base plate made SPECIFICALLY for 30x92mm & 30X90mm (CRG) karts. Clamps NOT included. NOTE: pic shown with 4-cycle top plate, not included.
$110.00
Diameter & Spacing
Select Clamps:
Qty
Odenthal EZ Set - 4-Stroke, 8 Degree - TOP PLATE ONLY
Top plate only, NOT ACTUAL PICTURE SHOWN.
$97.00
Qty
Odenthal EURO Clamp, 30x92mm
Select front or rear clamp. Sold individually.
$19.00
Select
Qty
Odenthal Frame Clamp
Sold individually. Click for more info.
$14.00
Frame Spacing
Tube Diameter
Qty
Burris 15 Deg 4-Cycle Mount System - International
Applications - 5 hp Briggs, Clone engines, BSP, Animal, World Formula, Yamaha YF200 R1, Honda GX160 & GX200Tecumseh Stars, and all F200 engines 
 
Burris revolutionized the 15 degree 4-cycle mount system with the best the industry had ever seen. Our design has a three point slotted mounting of the slider to the base allowing for instant engine repositioning as well as a more structurally ridged package. Every critical surface has been machined to insure fit, function and performance. The 15 degree angle of this mount gives you the necessary clearance for either tank to tire or carb to tire for both flat head and OHV applications. We also know that looks matter, so to give your Burris mount that distinctive look, we black anodize and laser engrave each mount with the Burris logo. Superior quality and craftsmanship is what we pride ourselves on.
BMC 544 = International Spacing 3.625” or 92mm from center to center on the frame rails
 
NOTE: For best fitment to minimize engine movement, use the optional clamps that are frame diameter and spacing specific. Stock clamps are universal to accommodate UP TO 32mm diameter and 92mm spacing, so anything smaller will be loose.
$112.95
Optional Frame Specific Clamps
Qty
Burris 7 Deg 4-Cycle Mount System - International
Burris 7 Deg 4-Cycle Mount System - International

Ideal for Briggs LO206. The 7 Deg Mount System is designed to be used on International spaced frame rails (3-5/8" or 92mm on center). The kit comes complete with all hardware, clamps, 7 degree chassis plate and the adaptor plate for commom 4-cycle engines (Briggs LO206, Honda GX200, Clones, Briggs Flathead, Briggs Animal, Briggs World Formula, Yamaha YF200 R1, etc...).

This kit will allow for 1.5" of lateral adjustment to gain proper alignment in missing seat struts and bearing hangers to make the job easy.

BMC 544 = International Spacing 3.625” or 92mm from center to center on the frame rails
 
NOTE: For best fitment to minimize engine movement, use the optional clamps that are frame diameter and spacing specific. Stock clamps are universal to accommodate UP TO 32mm diameter and 92mm spacing, so anything smaller will be loose.
$109.95
Optional Frame Specific Clamps
Qty
Burris 5 Deg 4-Cycle Mount System - International
Some prefer this mount over the #544 for the Briggs World Formula. International spaced 4-cycle mount kit with 5 degree chassis plate and 4-cycle adaptor plate. Complete with all necessary hardware and clamps.
BMC 544 = International Spacing 3.625” or 92mm from center to center on the frame rails
 
NOTE: For best fitment to minimize engine movement, use the optional clamps that are frame diameter and spacing specific. Stock clamps are universal to accommodate UP TO 32mm diameter and 92mm spacing, so anything smaller will be loose.
$104.95
Optional Frame Specific Clamps
Qty
Burris Replacement Clamp
BMC 563 replacement clamp. Fits the following frame configurations: 32x92, 30x92, 28x92, 30x90, 28x90mm. Sold Individually.
$13.95
Qty
FTP Aluminum Motor Mount Clamp
CNC'ed aluminum. Sold individually.
$15.95
Select Size
Qty