Home :: Carb/Intake/Fuel Accessories :: Airboxes & Accessories

Airboxes & Accessories

Fastech-Racing carries a full line of kart racing airboxes and air filters including KG, Freeline & RLV.

Products

KG POWER Airbox (Rain hood Included)
KG POWER Airbox (Rain hood Included)
SKU: FA.009.AG1

FA.009.AG. New KG POWER airbox. This product is the result of the most advanced fluidodynamics research giving you now the best performance for your kart engine while at the same time being in full compliance to strict CIK-FIA regulations on sound absorption and dusts filtering. The flow dynamic has been dramatically improved with a new airbox design and a new rubber boot to the carburetor. The KG POWER airbox- PO37 filter design allows for maximum air flow and maximum powders filtering, of the like of particles with a minimum of 37 micron diameter – airflow of 4,500 l/m2sec, with a steady performance during utilization. The filter PO37, like all of the Sprint Filter products, has an unlimited life as it can be cleaned with compressed air.

$279.95
Select Inlet
Qty
KG Nitro Airbox (Rain hood Included) - 30mm
KG Nitro Airbox (Rain hood Included) - 30mm
SKU: FA.008.AG

KG presents the intake silencer model NITRO, from January 2016 on the market. NITRO is the result of an advanced research for the minimization of the pressure drop and optimization of the internal volume. All in full compliance with the CIK-FIA rules both in terms of dust filtration and above sound absorption. All this through a lot of tests with sound-absorbing materials and various internal geometries. Performance results are remarkable with improvements at all rpms beginning to 9000 rpm.

$145.95
Market price: $179.95 save 19%
Qty
Righetti Active NEW (Gen2) Noise Filter, Red/Black (2021 Homologation) - 23mm
Righetti Active NEW (Gen2) Noise Filter, Red/Black (2021 Homologation) - 23mm
SKU: KE084RN1
The filter cartridge used for the Active noise filter is made of polyester and it can be cleaned with solvents, gasoline and compressed air.
This cartridge has a filtering of particles of more than 10µm (10 thousandths of a millimeter) and it is evaluated as the best compromise between air flow and air cleaning.
10µm value allows also the filtering of the impurities produced from the front brake system: it is usually between 15µm and 30µm and it is know these impurities are very aggressive with the inside parts of the engine.
The new cartridge has a reed barrier to modify the air flow and reduce the turbulence inside the airbox.
The new inlet pipes have a better Venturi effect with a better performance.
- CIK/FIA Homologation: 005-SI-67 Validity 2019-2021
- Colour: Red Body, Black Tubes
- Tubes: 23mm
- Net Weight: 1350gr
$169.95
Qty
Righetti Active NEW (Gen2) Noise Filter, Red/Black (KZ) (2021 Homologation) - 30mm
Righetti Active NEW (Gen2) Noise Filter, Red/Black (KZ) (2021 Homologation) - 30mm
SKU: KE084RN
The filter cartridge used for the Active noise filter is made of polyester and it can be cleaned with solvents, gasoline and compressed air.
This cartridge has a filtering of particles of more than 10µm (10 thousandths of a millimeter) and it is evaluated as the best compromise between air flow and air cleaning.
10µm value allows also the filtering of the impurities produced from the front brake system: it is usually between 15µm and 30µm and it is know these impurities are very aggressive with the inside parts of the engine.
The new cartridge has a reed barrier to modify the air flow and reduce the turbulence inside the airbox.
The new inlet pipes have a better Venturi effect with a better performance.
- CIK/FIA Homologation: 005-SI-67 Validity 2019-2021
- Colour: Red Body, Black Tubes
- Tubes: 30mm
- Net Weight: 1350gr
$169.95
Qty
Righetti Ridolfi ACTIVE Airbox - 23mm - Blue/Chrome
Righetti Ridolfi ACTIVE Airbox - 23mm - Blue/Chrome
SKU: SKU66410

23mm only in Blue for TAG or similar classes. CIK/FIA 27-28/SA/24

$89.95
Market price: $179.95 save 50%
Qty
Hose Clamp for RR ACTIVE Airbox
Hose Clamp for RR ACTIVE Airbox
SKU: SKU664101
Special skinny hose clamp for Righetti Active airbox.
$6.95
Qty
Righetti Angled Boot (for ACTIVE Airboxes)
Righetti Angled Boot (for ACTIVE Airboxes)
SKU: KE080-10
Angled rubber intake boot for ACTIVE airbox
$28.00
Qty
Righetti Rain Hood for ACTIVE Airboxes (Gen2)
Righetti Rain Hood for ACTIVE Airboxes (Gen2)
SKU: KE079
-
$29.95
Qty
0225.GLB29, INTAKE Airbox SILENCER LB29 (Rok Shifter or Moto)
0225.GLB29, INTAKE Airbox SILENCER LB29 (Rok Shifter or Moto)
SKU: 0225.GLB29*

OEM airbox for Vortex Rok Shifter. 29mm inlet. Also for Honda CR80/85/125 moto shifter engines. Internal filter not included.

$65.00
Qty
RR Airbox Screens, Fits X30/Leopards, RLV (1-Pair)
RR Airbox Screens, Fits X30/Leopards, RLV (1-Pair)
SKU: SKU1597
Screens fit Leopards, X30 and RLV 29mm 2-4 Hole airboxes. (1-Pair)
$10.95
Qty
Airbox / Filter Clamp with Thumb Screw (50-70mm)
Airbox / Filter Clamp with Thumb Screw (50-70mm)
SKU: SKU2056

Easily install and remove the airbox with this high quality, solid band, stainless clamp.

$4.95
QTY Discount
Qty
High Quality Stainless Hose Clamps (50-70mm) - Filter/Airbox
High Quality Stainless Hose Clamps (50-70mm) - Filter/Airbox
SKU: ID6521
High quality stainless steel hose clamp also known as smooth band clamps, these have a non-perforated band with rolled edges to prevent damage to hose and tube. Band is 3/8" wide and 0.024" thick. Tighten screw with a slotted screwdriver, Phillips screwdriver, or 9/32" (7 mm) hex nut-driver. 50-70mm.
$3.50
Qty
Righetti Ridolfi NOX & ACTIVE Airbox Element
Righetti Ridolfi NOX & ACTIVE Airbox Element
SKU: KE075

Replacement element for NOX and ACTIVE airboxes.

$65.00
Qty
Bungie Cords for Airboxes and Filters (sold induividually)
Bungie Cords for Airboxes and Filters (sold induividually)
SKU: 9720
(sold induividually)
$2.50
Qty
UNI RLV Airbox Filter - Standard Length, Angled
UNI RLV Airbox Filter - Standard Length, Angled
SKU: RLV150
Standard foam airbox filter. Use Uni Short-Style foam filter for RLV_0344 and Freeline AL29PD airboxes.
$20.95
Qty
UNI RLV Airbox Filter - Standard Length, Straight
UNI RLV Airbox Filter - Standard Length, Straight
SKU: RLV1501
Standard foam airbox filter. Use Uni Short-Style foam filter for RLV_0344 and Freeline AL29PD airboxes.
$20.95
Qty
GH (Greyhound) Rain Hood for Vortex Mini Rok
GH (Greyhound) Rain Hood for Vortex Mini Rok
SKU: SKU7259012

Greyhound lightweight rain hood for Vortex Mini Rok. 165grams.

$74.95
Qty
IMAF Rain Hood for IAME Mini Swift - Silver
IMAF Rain Hood for IAME Mini Swift - Silver
SKU: SKU7259011

IMAF lightweight rain hood for IAME Mini Swift. 190grams w/ hardware.

$74.95
Qty Out of stock
Click here to subscribe for 'Back-in-stock' notifications
IMAF Rain Hood for Vortex Mini Rok
IMAF Rain Hood for Vortex Mini Rok
SKU: SKU725901

IMAF lightweight rain hood for Vortex Mini Rok. 145grams w/ hardware.

$74.95
Qty
UNI Foam Airbox Filter - Mini Rok
UNI Foam Airbox Filter - Mini Rok
SKU: SKU72590
Originally designed for the Mini Rok airbox but also fits fits RLV and Freeline airboxes perfectly without getting scrunched up. NOTE: NOT SKUSA LEGAL FOR MINI ROK
$19.00
Qty
UNI Foam Airbox Filter - Short Style 4" (for RLV, Freeline, Rok airboxes)
UNI Foam Airbox Filter - Short Style 4" (for RLV, Freeline, Rok airboxes)
SKU: RLV0205

Slightly shorter filter to fit Mini Rok, Rok Shifter and RLV airboxes.

$19.00
Qty Out of stock
Click here to subscribe for 'Back-in-stock' notifications
Airbox Replacement Intake Boot
Airbox Replacement Intake Boot
SKU: SKU1116
Fits all airboxes, i.e. RLV, Freeline, Righetti, etc.
$10.95
Qty
RR Airbox Rain Hood
RR Airbox Rain Hood
SKU: K914
Righetti Ridolfi K914 rain hood. Fits most airboxes with side intake as well as the stock Leopard/X30 airbox.
$25.95
Qty
Hegar Honda CR125 Air box / filter mount
Hegar Honda CR125 Air box / filter mount
SKU: SKU2189
Air Filter & Air box mount support for the spec and Open 99 Honda CR 125. This Stainless steel bracket with foam padded cradle and bungee fasteners will work with straight or 5 degree RS Honda manifolds or the 30 degree stock intake manifold as allowed in IKF, WKA and SKUSA, it bolts to the large rear motor mount bolt. Comes as described, very clean and easy to deal with. Keeps the carb and air cleaner from falling off under rough track conditions. Note: Filter not included.
$84.95
Qty
RLV #0536 Airbox Mount
RLV #0536 Airbox Mount
SKU: RLV12
Made of anodized aluminum. Used to securely mount front mounted airboxes on front mounted airboxes, i.e. ICC karts, Parilla Leopards, Parilla BM, etc.
$31.95
Qty
RLV #0536 Airbox Mount, WITH Cradle
RLV #0536 Airbox Mount, WITH Cradle
SKU: RLV121
Best mount to secure a front mounted airbox, i.e X30, Leopard, KA100, KT100, VLR, Rok GP, KZ, Rok Shifter, etc.
$46.90
Qty
RLV Airbox Cradle Kit
RLV Airbox Cradle Kit
SKU: RLV0376
Includes cradle, two bungies & hardware. Keeps the airbox from flopping around and minimizing the chance of ripping the rubber boot.
$14.95
Qty
K&N Filter Care Service Kit (Aerosol)
K&N Filter Care Service Kit (Aerosol)
SKU: 99-5000

K&N® Recharger® Kit 99-5000 is designed to restore the performance of your K&N® oiled cotton air filter, and includes a 6.5-ounce aerosol can of oil and a 12-ounce spray bottle of POWER KLEEN®. POWER KLEEN® industrial strength degreaser helps dissolve dirt, old filter oil, and other filter-clogging particulates, allowing them to be rinsed away easily with® water. When used as directed, the included air filter oil remains suspended in the pleats of the cotton filter material, allowing for exceptional contaminant capture. View the complete cleaning instructions included in your kit.

$14.95
Qty
K&N Filter Oil - 6.5oz
K&N Filter Oil - 6.5oz
SKU: 99-0504

K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N Filtercharger® elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with K&N Air Filter Cleaner.

 

 

$8.95
Qty
Motul A3 Air Filter Oil - 8.6oz Spray
Motul A3 Air Filter Oil - 8.6oz Spray
SKU: SKU69306
Lubricant specially developed for the maintenance of foam air filters of off road bikes and quads. Improves air filter efficiency for better carburetion. Effectively retains dust, mud and sand for greater engine durability. Prevents water from entering the filter. Blue in color.
$8.95
Qty