Home :: Bodywork & Bumpers :: Bodywork Accessories

Bodywork Accessories

Fastech-Racing offers a full line of bodywork accessories for racing karts. Please call us for any unlisted items.

Products

FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
 
(0 reviews)  
Saves nearly 1/4 pound when replacing the steel hardware. This new unique style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.
$47.95
Select Frame Outer Diameter
Select Bumper Mount Insert
Qty
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - STEEL
 
(0 reviews)  
The FTP "Floating" bumper bolt kit allows the rear bumper mount to float and not bind on the hardware. No need for additional backup mounts, cables, etc. or the need to run the mounts sloppy loose to free up the kart. No special tools needed. Fits most karts, CRG, OTK, Tony, Kosmic, Intrepid, Praga, OK1, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.
$19.50
Market price: $25.95 save 25%
Select Frame Outer Diameter
Select Bumper Mount Insert
Qty
FTP "Floating" Rear Bumper Bolt - Intrepid, Praga, Italkart (Sold individually) - STEEL
 
(0 reviews)  
Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
$13.50
Market price: $17.95 save 25%
Qty
FTP "Floating" Rear Bumper Bolt - NEW STYLE (Sold individually) - TITANIUM
 
(0 reviews)  
Only 61g/2.2oz...about half the weight of the steel equivalent bolt. Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
$32.95
Qty
FTP Bumper Rubber - 10x1.5mm Thread Size
 
(0 reviews)  
Works with any bumper hardware with M10x1.5mm thread. Sold Individually.
$8.95
Select Frame Outer Diameter
Qty
Extended Rear Bumper Bushing
Extended Rear Bumper Bushing
 
(0 reviews)  
Aluminum Extended Rear Bumper Bushing will extend the plastic or tubular rear bumper back approximately 25mm (1 inch) to clear exhaust systems, most commonly to clear the Rotax exhaust. 10mm hole. Sold individually.
$5.95
Select Frame Diameter
Qty
#3014 KG Bumper Mount - Drop Down Style
 
(0 reviews)  
Fits all KG bumpers that have a bolt-on style bolded mount. Also fits OTK/Tony M6, M4 & Cadet bumpers. Required for USPKS & Route 66 Series.
$28.00
Qty
KG Front Bumper Plastic Mid-Support - BLACK
 
(0 reviews)  
NOT ACTUAL PIC SHOWN. Only BLACK in stock.
$10.95
Qty
Quick Release Bumper Clamps (1-Pair) - KG
 
(0 reviews)  
2 Clamps included.
$37.95
Qty
Spacer Block Kit for Push Back Nosecones
Spacer Block Kit for Push Back Nosecones
 
(0 reviews)  

The Spacer Block Kit provides two machined plastic blocks that are inserted into the space between the Push Back nosecone blocks, and the chrome bumper of the kart.  These blocks bear the load when the kart is tipped onto its nose during the lifting and lowering process that is commonly associated with one person kart stands.  There is a channel machined in the side that fits against the chrome bumper to allow clearance for the bumper clamp.

Kit includes 2 machine spacer blocks and a convenient tether to make hanging them on your empty stand easy.  MADE IN THE USA

Fits WinchLift, Pro KartLift, Electric Kartlift, Dalmi Lift, Streeter Superlift, and any other stand that tips kart onto the nose.

$70.00
Qty
SKM Fairing Brackets (1 Pair)
 
(0 reviews)  
Standard fairing brackets to fit most karts.
$20.95
Qty
Titanium Fairing Brackets, CRG Style (1 Pair)
 
(0 reviews)  
Titanium fairing brackets fit most karts. 3oz per bracket, nearly half the weight of standard steel brackets. 60-75-60mm sections, 12" overall length.
$48.95
Qty
Titanium Fairing Brackets, Standard (1 Pair)
 
(0 reviews)  
Titanium fairing brackets fit most karts. 2.5oz per bracket, nearly half the weight of standard steel brackets. 35-80-45mm sections, 10" overall length.
$38.95
Qty
Titanium Fairing Brackets, Tony/OTK Style M6 - LOWER
 
(0 reviews)  
OTK/Tony style titanium LOWER fairing for M6 bodywork saves almost 1.5oz compared to OEM steel. Get all three brackets, top and bottom and save close to 5oz.
$22.95
Qty
Titanium Fairing Brackets, Tony/OTK Style M6 - UPPER (1 Pair)
Titanium Fairing Brackets, Tony/OTK Style M6 - UPPER (1 Pair)
 
(0 reviews)  
OTK/Tony style titanium fairing brackets for M6 bodywork saves almost 4oz (1/4 lb) compared to OEM steel. Get all three brackets, top and bottom and save close to 5oz.
$48.95
Qty
Titanium OTK M6 (and KG Duo) Nerf Bar Set (Left & Right)
 
(0 reviews)  
High quality, lightweight, TIG welded titanium GR2, OTK/Tony M6 Style weigh in at 1.2 pound even per side, saving almost 2.4 pounds from the steel nerf bars. Also works with KG DUO with additional spacers.
$299.95
Qty
Titanium Tony/OTK Style M6 Lower Front Bumper Bar
Titanium Tony/OTK Style M6 Lower Front Bumper Bar
 
(0 reviews)  
OTK/Tony style titanium LOWER bumper bar w/ integrated pedal stop. 9.5 oz, nearly half the weight of OEM steel.
$129.95
Qty
Side Pod Extender Set (1 pair) - 25mm (1" extension)
 
(0 reviews)  
Side pod extenders allow you to space the nerf bar an additional 1" (25mm) out from the frame on each side. The extenders move the side pods further out to help cover the rear wheels. These work very well on Cadet or full size karts using the older slant style nerf bars. The extenders will need to be drilled for bolt holes. 2 extenders per set, enough for one side.
$18.95
Market price: $35.00 save 46%
Qty
KG Front Fairing Support Kit (Pins, clips & gromets)
 
(0 reviews)  
Includes 3 each, pins, clips and grommets.
$14.95
Qty
Rubber Grommets for KG Driver Panels
 
(0 reviews)  
Sold individually.
$1.50
Qty
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
 
(0 reviews)  
Ultra lightweight at about 7oz/198g per side, saving a total of 13oz/369g (over 3/4 pound) in the brackets only! Fits KG, Italkart, Intrepid, Praga, OTK, Tony, Kosmic, FA, CRG/KG and others. 1-Pair, 2 mounts included.
 
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
 
 
One pair included.
$249.95
OPTIONAL Ti Bumper Bolt Kit
Qty
Italian Motors Fairing Bracket / Data Logger Mount for IAME/Rotax
Italian Motors Fairing Bracket / Data Logger Mount for IAME/Rotax
 
(0 reviews)  
Mount the Mychron data logger or vent bottle securely to the Italian Motors steel fairing bracket. Incredibly durable! For IAME key ignition and Rotax Max Start & on/off button. Click for dimensions.
$49.95
Qty
Loop Strap - 1"
 
(0 reviews)  
Used to secure 5/8" radiator hoses to the seat or engine. Metal loops with rubber isolator. Sold individually.
$1.25
Qty
Loop Strap - 16mm
 
(0 reviews)  
Used to mount Stilo bodywork to aluminum support bar. Metal loops with rubber isolator. Sold individually.
$0.95
Qty
Loop Strap - 20mm
 
(0 reviews)  
For number plates and to mount Stilo bodywork to 20mm nerf bar. Metal loops with rubber isolator. Sold individually.
$0.95
Qty
Quick Release for Righetti Ridolfi Bumper Mount (Set of 2)
 
(0 reviews)  
Quick release pins for the Righetti Ridolfo XTR14 rear bumper mount.
$7.95
Qty
Side Pod Quick Release
 
(0 reviews)  
Tired of un-bolting the side pod bolts??? Use these instead of the nerf bar bolts for a quick release. Replaces 6mm nerf bar bolts.
$3.95
Qty
KG Upper Loop Front Bumper
 
(0 reviews)  
KG Upper Loop Front Bumper. Fots most european karts, i.e. Italkart, Intrepid, CRG, Avanti, etc.
$23.95
Qty
KG Lower Loop Front Bumper
 
(0 reviews)  
KG Lower Loop Front Bumper
$11.95
Qty
KG EVO Stilo Nerf Bar
 
(0 reviews)  
Nerf bar for KG EVO & Buru bodywork.
$51.95
Select
Qty
KG Nerf Bar - DUO / Unico (Sold Individually)
 
(0 reviews)  
Fits both Unico & DUO pods.
$49.95
Side
Qty
KG Nerf Bar Set (Left & Right) - DUO / Unico
 
(0 reviews)  
Fits both Unico & DUO pods. Set includes both left and right nerf bars.
$95.95
Qty