Home :: Brakes :: Brake Hardware (Lines, fittings, etc.)

Brake Hardware (Lines, fittings, etc.)

Products

Brake Line w/ Swivel Ends
Brake Line w/ Swivel Ends
Stainless braided brake lines with swivel ends.
$17.95
Select Overall Length
Qty
Brake Line Fitting - 90 Elbow
Sold individually.
$6.95
Qty
Brake Line Fitting - Straight
Sold individually.
$6.95
Qty
Brake Line Fitting - Tee
Brake line tee for three piece brake lines. Sold individually.
$12.95
Qty
Brake Pad Hardware with Sleeve & Spring - REAR (Set of 4)
Fits most karts that have a shimming type caliper and has a 6mm threaded hole in the back of the pad. Fits SKM, Italkart, Intrepid, Avanti, Righetti calipers and more. Exposed thread is 6mm in length, 23mm sleeve, 19mm spring. Set of 4, enough for one caliper.
$19.95
Qty
Brake Rod Clevis
6mm female brake clevis with securing pin. Sold individually.
$6.95
Qty
Righetti Stainless Steel Brake Rod
High quality stainless steel brake rod with 6mm threaded ends black nylon protective housing.
$14.95
Select Length
Qty
Titanium Brake Rod Rod - 500mm (~20")
Lightweight titanium brake rod. 500mm overall length, threaded 150mm on one end and 50mm on the other. It could be easily shortened to 320mm (12.5") without re-threading.
$24.95
Qty
TITANIUM Brake Banjo (10x1.0mm) - Double
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$15.95
Qty
TITANIUM Brake Banjo (10x1.0mm) - Double w/ 6mm Bleeder
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$23.95
Qty
Brake Banjo (10x1.0mm) - Double
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$8.95
Qty
Brake Banjo (10x1.0mm) - Double w/ Bleeder
Made of aluminum. Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$19.95
Qty
TITANIUM Brake Banjo (10x1.0mm) - Single
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$12.95
Qty
TITANIUM Brake Banjo (10x1.0mm) - Single w/ 6mm Bleeder
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$20.95
Qty
TITANIUM Brake Bleeder (6x1.0mm)
Fits most current karts with 6x1mm bleeder screws, i.e. CRG, Italkart, Intrepid, Tony, etc. Sold individually.
$7.95
Qty
Brake Banjo (10x1.0mm) - Single
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$6.95
Qty
Brake Banjo (10x1.0mm) - Single w/ Bleeder
Fits most current karts with banjo fittings, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$10.95
Qty
Brake Banjo / Master Cylinder Plug (10x1.0mm)
10mm plugs on calipers and master cylinders. Sold individually.
$3.95
Qty
Brake Banjo Washer (10mm)
For brake lines or 10mm plugs on calipers and master cylinders. Sold individually.
$0.90
Qty
Brake Bleeder Nipple - 10x1.0mm
Fits most current karts with 10mm bleeders, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$6.95
Qty
Brake Bleeder Nipple - 6x1.0mm
Fits most current karts with 6mm bleeders, i.e. CRG, Italkart, Intrepid, etc. Sold individually.
$6.95
Qty
Speed Bleeders - 10x1.0mm (2-pack)
Speed Bleeders - 10x1.0mm (2-pack)
10x1.0mm Thread Speed Bleeders® Take The Work Out Of Brake Bleeding! Fits Italkart, Intrepid, Brembo and others. 2 per pack.
$15.95
Qty
Speed Bleeders - 6x1.0mm (2-pack)
Speed Bleeders - 6x1.0mm (2-pack)
6x1.0mm Thread Speed Bleeders® Take The Work Out Of Brake Bleeding! Fits Italkart, Intrepid and others. 2 per pack.
$15.95
Qty
Loop Strap - Brake Lines
Used to secure brake lines to the chassis or floorpan. Metal loops with rubber isolator. Sold individually.
$0.75
Qty