Home :: Engine Parts :: Engine Mounts :: Burris Mounts

Burris Mounts

Products

FTP Aluminum Motor Mount Clamp
CNC'ed aluminum. Sold individually.
$15.95
Select Size
Qty
Burris 15 Deg 4-Cycle Mount System - International
Applications - 5 hp Briggs, Clone engines, BSP, Animal, World Formula, Yamaha YF200 R1, Honda GX160 & GX200Tecumseh Stars, and all F200 engines 
 
Burris revolutionized the 15 degree 4-cycle mount system with the best the industry had ever seen. Our design has a three point slotted mounting of the slider to the base allowing for instant engine repositioning as well as a more structurally ridged package. Every critical surface has been machined to insure fit, function and performance. The 15 degree angle of this mount gives you the necessary clearance for either tank to tire or carb to tire for both flat head and OHV applications. We also know that looks matter, so to give your Burris mount that distinctive look, we black anodize and laser engrave each mount with the Burris logo. Superior quality and craftsmanship is what we pride ourselves on.
BMC 544 = International Spacing 3.625” or 92mm from center to center on the frame rails
 
NOTE: For best fitment to minimize engine movement, use the optional clamps that are frame diameter and spacing specific. Stock clamps are universal to accommodate UP TO 32mm diameter and 92mm spacing, so anything smaller will be loose.
$111.95
Optional Frame Specific Clamps
Qty
Burris 5 Deg 4-Cycle Mount System - International
Some prefer this mount over the #544 for the Briggs World Formula. International spaced 4-cycle mount kit with 5 degree chassis plate and 4-cycle adaptor plate. Complete with all necessary hardware and clamps.
BMC 544 = International Spacing 3.625” or 92mm from center to center on the frame rails
 
NOTE: For best fitment to minimize engine movement, use the optional clamps that are frame diameter and spacing specific. Stock clamps are universal to accommodate UP TO 32mm diameter and 92mm spacing, so anything smaller will be loose.
$104.95
Optional Frame Specific Clamps
Qty
Burris 7 Deg 4-Cycle Mount System - International
Burris 7 Deg 4-Cycle Mount System - International

Ideal for Briggs LO206. The 7 Deg Mount System is designed to be used on International spaced frame rails (3-5/8" or 92mm on center). The kit comes complete with all hardware, clamps, 7 degree chassis plate and the adaptor plate for commom 4-cycle engines (Briggs LO206, Honda GX200, Clones, Briggs Flathead, Briggs Animal, Briggs World Formula, Yamaha YF200 R1, etc...).

This kit will allow for 1.5" of lateral adjustment to gain proper alignment in missing seat struts and bearing hangers to make the job easy.

BMC 544 = International Spacing 3.625” or 92mm from center to center on the frame rails
 
NOTE: For best fitment to minimize engine movement, use the optional clamps that are frame diameter and spacing specific. Stock clamps are universal to accommodate UP TO 32mm diameter and 92mm spacing, so anything smaller will be loose.
$109.95
Optional Frame Specific Clamps
Qty
Burris Replacement Clamp
BMC 563 replacement clamp. Fits the following frame configurations: 32x92, 30x92, 28x92, 30x90, 28x90mm. Sold Individually.
$13.95
Qty