Home :: Chassis / Roller - By Brand :: Chassis - CRG :: Chassis Parts - Titanium

Chassis Parts - Titanium

Products

CRG Floating Brake Pin Assembly - V05/10/11 Front (& 2000+) TITANIUM (6-pack)
High quality, Grade 5, ultra lightweight titanium hardware. 47% lighter than steel, Corrosion resistant, Reduce overall weight. Six pins are 51 grams (1.8 oz). Includes enough to mount the two front disc. Includes spring washers, C-clips and Safety Clips. Replace front and rear floating pins to save 85g (3oz). Fits CRG karts (including GP, Aluminos, Maranello, DR, Zanardi, etc.)
$119.95
Qty
CRG Steering Shafts, #10, TITANIUM
OEM Style #10 (replaces FC0.03795) full length shaft. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving nearly ½ pound compared to a steel steering shaft.
$149.95
Qty
CRG Steering Shafts, 3-pos, TITANIUM
OEM Style 3-position (replaces FC0.01513) full length shaft. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving nearly ½ pound compared to a steel steering shaft.
$149.95
Qty
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
Ultra lightweight at about 7oz/198g per side, saving a total of 13oz/369g (over 3/4 pound) in the brackets only! Fits KG, Italkart, Intrepid, Praga, OTK, Tony, Kosmic, FA, CRG/KG and others. 1-Pair, 2 mounts included.
 
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
 
 
One pair included.
$249.95
OPTIONAL Ti Bumper Bolt Kit
Qty
Steering Shafts, 3-pos "CRG Style", TITANIUM - (Clearance)

These titanium shafts were modeled off the aftermarket CRG shafts, slightly different the OEM Style 3-position. High quality, lightweight, TIG welded titanium GR2 shafts nearly half the weight, saving nearly ½ pound compared to a steel steering shaft. 3 position steering shaft. All shafts are 20mm diameter w/ 8mm stud. A=500mm, B=85mm, E=28mm

$84.95
Market price: $149.95 save 43%
Qty
Titanium CRG Style Kingpin (10x110mm) - for Sniper Adjusters  - (Sold Individually)
Titanium CRG Style Kingpin (10x110mm) - for Sniper Adjusters - (Sold Individually)
High quality, Grade 5, ultra lightweight titanium hardware. 47% lighter than steel, Corrosion resistant, Reduce overall weight.
$17.95
Quantity Discount
Qty
Titanium CRG Style Rear Bumper Bolt (8x120mm) - (Sold Individually)
Titanium CRG Style Rear Bumper Bolt (8x120mm) - (Sold Individually)
High quality, Grade 5, ultra lightweight titanium hardware. 47% lighter than steel, Corrosion resistant, Reduce overall weight. 30 grams (1 oz)
$15.95
Quantity Discount
Qty
Titanium CRG Style Shift Lever (Knob not included)
Titanium CRG Style Shift Lever (Knob not included)
CRG style titanium shift lever is a direct replacement, nearly half the weight of the OEM steel lever at 1lb-6oz (625g).
$349.95
Optional Ti 280mm Bolt & Nut
Qty
Titanium Fairing Brackets, CRG Style (1 Pair)
Titanium fairing brackets fit most karts. 3oz per bracket, nearly half the weight of standard steel brackets. 60-75-60mm sections, 12" overall length.
$48.95
Qty
Titanium KG Stilo EVO Style Nerf Bars (1 Pair)
Titanium KG Stilo EVO Style Nerf Bars (1 Pair)
High quality, lightweight, TIG welded titanium GR2 KG Stilo EVO nerf bars weigh in at 1 pound even per side, saving almost 2 pounds from the steel nerf bars. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. CRG owners looking to save weight (3.2# in only nerfs), simply get EVO pods which are lighter anyways and graphics fit. Fits most Intrepid, Italkart, Praga, Arrow, Topkart or any karts that use KG EVO Stilo pods. Very limited supply in stock!
$299.95
Qty
Titanium KG Style Lower Bumper Hoop
High quality, lightweight, TIG welded titanium GR2 KG lower hoop weigh in at 0.4 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. Fits most karts with a removable lower hoop. Very limited supply in stock!
$79.95
Qty
Titanium KG Style Upper Bumper Hoop
Titanium KG Style Upper Bumper Hoop
High quality, lightweight, TIG welded titanium GR2 KG upper hoop weigh in at 0.8 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. Fits most karts. Very limited supply in stock!
$139.95
Qty
Titanium Bolt & Nylock for CRG Style Shift Lever
280mm bolt and nylock for CRG shift lever. 2.3oz (66g).
$44.95
Qty
CRG Aluminum Shift Knob - Black
OEM black aluminum shift knob.
$14.95
Qty
Titanium Brake Rod Rod - 500mm (~20")
Lightweight titanium brake rod. 500mm overall length, threaded 150mm on one end and 50mm on the other. It could be easily shortened to 320mm (12.5") without re-threading.
$24.95
Qty
Titanium Shift Round Rod - 500mm (~19 5/8")
This is the fix for broken aluminum shift rods. Slightly heavier but strong as steel! High quality, solid titanium shift rod. 50mm length, 12mm diameter. One end is Left-hand threaded. Opposite end is NOT threaded but pre-drilled for 8mm tap. Cut to length, bend and tap as needed. Rod ends are OPTIONAL.
$59.95
Optional Rod Ends
Qty