Home :: Engine Parts :: Honda CR125 Parts :: CR125 Ignition Parts

CR125 Ignition Parts

Products

CR125 Ignition Coil: 30500-GY8-901(Supercedes 30500-KZ3-B01)
CR125 Ignition Coil: 30500-GY8-901 (Supercedes 30500-KZ3-B01)
$43.95
Qty
SKUSA CR125 Timing Plate
This Timing plate was developed to set timing to stock settings as required on February 1, 2014. The stock plate is no longer allowed.

Installation is simple: install the new plate in place of the stock plate with the standard 6 x 18 hex bolt or full thread replacement. Make sure the plate locates on the cast dowel and hold in position with a 4 x 10 screw (the stock 4 x 8 will also work if you have retained it).

Note that no modifications to the stator hold down bolts or to the SKUSA plate is permitted. No other modification to any of the ignition components that changes static timing is permitted beyond what the SKUSA plate allows. This also applies to the rotor, crankshaft, keys and keyways.
$13.00
Qty
Swedetech CR125 Coil Mount (Intake)
This coil mounting kit features a gold anodized CNC billet aluminum bracket and includes everything that you need to properly secure the coil to your Honda CR125 125cc 2-stroke engine. Extension wire not needed if the Swedetech CDI holder is used.
$46.99
Select
Qty
Swedetech CR125 Coil Mount (Primary Cover)
SwedeTech Racing Engines offers two specific coil mounts for the Honda CR125 engine. The newest version mounts to the primary cover. The coil mount kit includes aluminum coil mount bracket, 2 bolts, 13" plug wire, spark plug boot, and secondary ground strap.
$46.99
Qty
Prospeed Honda CR125 Coil mount
Machined aluminum Honda CR125 coil mount with hardware.
$27.95
Qty
1999 CR125 Ignition CDI Box #30410-KZ4-J11
Stock 99 CR125 ignition box.
$199.95
Qty
CR125 CDI Rubber Holder, 30401-KZ3-J10
OEM rubber CDI holder.
$7.95
Qty
Swedetech CR125 CDI Mount
The new Swedetech CR125 mount secures the CDI straight to the engine, eliminating the need to extend the wires. Easy access to the oil level plug as well. Rubber CDI holder not included (Normally included with the engine).
$27.99
Qty
Honda CR125 Stator Assembly #31100-KZ4-J11
Honda CR125 Stator Assembly #31100-KZ4-J11
$342.95
Qty
Swedetech CR125 Stator and Flywheel Cover
Swedetech CR125 Stator and Flywheel Cover
SwedeTech designed the new stainless steel stator and flywheel cover to be low profile, while allowing for adequate protection of the driver and the rotating ignition flywheel.  The OEM plastic cover is very bulky.  Other aftermarket flywheel covers expose the rotating flywheel, which will not protect the parts from rubbing against the seat.
$39.99
Qty
NGK BR10EG Spark Plug
Resistor, fine wire (1.3mm) Nickel center electrode. Used on most TaG and shifter engines, i.e. Parilla Leopard, PRD Fireball, TM ICC, Honda CR80 & CR125, etc.
$4.95
Qty
NGK BR10EIX Spark Plug
Resistor, fine wire (0.6mm) Iridium center electrode. Used on most TaG and shifter engines, i.e. Parilla Leopard, PRD Fireball, TM ICC, Honda CR80 & CR125, etc
$7.95
Qty
NGK R7282-10 Racing Spark Plug
The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4") Reach, 13/16" (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020" (0.508mm) Gap. Used on most TaG and shifter engines, i.e. Parilla Leopard, PRD Fireball, TM ICC, Honda CR80 & CR125, etc.
$41.95
Optional Cap
Qty
NGK R7282-105 Racing Spark Plug
The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4") Reach, 13/16" (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020" (0.508mm) Gap. Used on most TaG and shifter engines, i.e. Parilla Leopard, PRD Fireball, TM ICC, Honda CR80 & CR125, etc.
$41.95
Optional Cap
Qty
NGK R7376-10 Racing Spark Plug
Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4") Reach, 13/16" (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020" (0.508mm) Gap. Used on most TaG and shifter engines, i.e. Parilla Leopard, PRD Fireball, TM ICC, Honda CR80 & CR125, etc
$34.95
Qty
NGK Red Racing Cable & Plug Cap
1000mm (~39 inches) red racing cable with integrated rubber sheathed silicone 5 ohm 90 degree connector, for terminal nut connector.
$16.95
Qty
NGK TB05EM Plug Cap - RED
5 ohm, 90 degree elbow type, 14mm w/ terminal nut, rubber sheathed, silicone, red.
$5.95
Qty
NGK TB05EMA Plug Cap
5 ohm, 90 degree elbow type, 14mm w/ terminal nut, rubber sheathed black.
$5.50
Qty