Home :: Engine Parts :: Honda CR125 Parts :: CR125 Motor Mounts

CR125 Motor Mounts


SharkShifter CR125 Engine Mount (Clamps included)

The Sharkshifter Adjustable CR125 Engine mount offers the following features.
 * Anodized 6061 T6 Aluminum Alloy Engine mount
 * Chassis clamps designed for 1 bolt per clamp
 * Adjust the engine from left to right for proper clearance approximately 6mm to the left and 12mm right from center More adjustment then any other mount
 *Engine Mount sits the rear of the engine up to 1" lower most other mounts
 - Hardware securing engine to the mount is the proper sizes to match the Honda Cases 10mm front case bolt 12 mm rear case bolt with proper thru case Machined Alum Spacers
 * Proper machining from front to back, engine will not be twisted when mounted to a straight frame.
 * Proper radius on frame contact point
 * Left side of rear engine mount machined to allow for chassis cross tubing weld clearance.You will not find a better motor mount . With the Sharkshifter factory Pricing. $199.00

 This is only a reference, for some chassis below. Contact your chassis Supplier for proper frame rail sizes.
 CRG, GP, Zanardi, DR, Aluminos, Maranello - 90mm spacing
 Tony, Kosmic, FA, Italkart, Intrepid, Arrow, Praga, Birel , ART: 92mm spacing

Frame Spacing
Swedetech CR125 Engine Mount (Clamps included)

The latest mount from Swedetech Racing Engines. Lightweight, CNC'ed & anodized aluminum. Ligntening holes and cut-outs throughout to reduce weight. Adjustable engine offset. Clamps included.

Frame Spacing
Swedetech CR125 Engine Mount - Bolt & Nut for Front Mount

Bolt & Nylock only for Swedetech front mount. NOT ACTUAL PIC SHOWN, only for reference.

Swedetech CR125 Engine Mount - FRONT ONLY

CR125 front mount ONLY w/ hardware.

Swedetech CR125 Engine Mount - ROD ONLY

Rod only for SRE mount.

Swedetech Motor Mount Clamp
Swedetech Motor Mount Clamp
Replacement Swedetech aluminum engine clamps. Sold separately.
Select Diameter and Spacing