Home :: Engine Parts :: Honda CR80 / CR85 Parts :: CR80 / CR85 Lower End

CR80 / CR85 Lower End

Products

EBC CT Clutch Tool Honda CR80 / CR85
EBC clutch tools allow easy installation of clutch kits. This tool allows positive holding of the clutch basket or center boss for untightening and retightening of securing nuts.
$16.95
Qty
EBC CR80 Clutch Kit - DRC1
Features anti-swell clutch friction plates, long lasting pin planished steel separator plates for better distribution and heavy duty clutch springs.
$58.95
Qty
EBC CR80 Clutch Spring Kit
Stiffer springs for stock or aftermarket clutch kits.
$13.95
Qty
Hard Anodized Aluminum CR80 Clutch Plates
Includes (4) Plates. Hard anodized aluminum drive plates will lighten the clutch assembly...Click for more info.
$59.95
Qty
CR80/85 Center Case Gasket
-
$9.95
Qty
CR80/85 Right Clutch Cover Gasket
-
$11.95
Qty
Main Bearings #6322 - NSK Polymide
6322 C4 Polymide Cage 80cc & 125cc Honda & 125cc Yamaha. Runs cooler and lower friction than stock. Sold Individually. Made in Japan.
$29.95
Qty
Main Bearing - #6322 - Ceramic Hybrid - FULLY SERVICABLE!

These are NOT the typical "Throw Away" bearings. Fully servicable by CBR. Made with SKF aerospace grade silicon nitride ceramic balls with a polymide low friction retainer.

$89.95
Qty
CR80 Teflon Counter Shaft Seal
(17 x 28 x 7) Double lip, drag free CR80 Teflon counter shaft seal. Used by most engine builders!
$8.95
Qty
CR80 Carbon / Teflon Left Crank Seal
(20 x 32 x 7) Double lip, drag free Carbon / Teflon left crank seal. Used by most engine builders!
$9.95
Qty
CR80 Carbon / Teflon Right Crank Seal
(22 x 40 x 8) Double lip, drag free Carbon / Teflon right crank seal. Used by most engine builders!
$10.95
Qty
Shift Rod - Aluminum
Aluminum shift rods are tapped for 8mm rod ends at each end (one left hand, on right hand), making it easy to adjust your shift linkage to an ideal position. Rod is 19.5 inches long to fit any kart, and can be cut to a shorter length if needed.
$15.95
Select Color / Shape
Add Tierod Ends & Jam Nuts
Qty
Moose Magnetic Drain Plug - CR80 / CR125
  • Prolong engine life and save on costly repairs with an oil plug that picks up metal filings
  • Must use washer provided
  • Predrilled for safety wire
  • Compare with original OEM plug before installing
  • $11.95
    Qty
    Honda CR80 Gasket Set
    Complete OEM gasket set. Seals not included.
    $54.95
    Qty
    Honda CR85 Gasket Set
    Complete OEM gasket set. Seals not included.
    $49.95
    Qty
    Honda CR80/85 Rod Kit, 13200-GBF-B40
    OEM rod kit for CR80 or CR85. Includes rod, pin and lower bearing. Crank washers not included. NOTE: We HIGHLY recommend upgrading the stock lower rod bearing to an IKO upgraded bearing. OEM won't last more than a couple hours on a modified 80/85.
    $78.95
    Qty
    Honda CR80/85 Crank Washer, 13202-GC4-600
    Crank washer sold individually. Two needed.
    $6.95
    Qty
    IKO CR80/85 Upgraded Lower Rod Bearing
    best lower rod bearing for 80/85 shifters.
    $54.95
    Qty
    Honda CR80/85 Crank Assembly, 13000-GC4-601
    OEM CR80/85 crank assembly. Top bearing not included.
    $154.95
    Qty