Home :: Tools :: Alignment Tools :: Eagle Eye Laser Alignment Tools :: Eagle Eye Magtronic Laser Alignment w/ Caster Attachment

Eagle Eye Magtronic Laser Alignment w/ Caster Attachment

Eagle Eye Magtronic Laser Alignment w/ Caster Attachment
SKU
SKU42339
Our price:
$410.00
Qty
Eagle eye magtronic Laser front axle alignment system
 
Made of high quality CNC aluminum. It has the ability to fit front stub axles with diameters from 12 to 25mm (1/2" to 1") diameter directly and larger stub axles to 40mm (1 5/8") for Gearbox or Shifter Karts with the extension set.
 
 
 
What it can do.
Eagle eye magtronic is for checking and setting the Toe, Camber and Caster angle (with the additional caster angle adapter) on most types of Kart. It has the ability to fit front stub axles with diameters from 12 to 25mm (1/2" to 1") diameter directly and larger stub axles to 50mm (1 5/8") for Gearbox or Shifter Karts with the extension set. It can so be fitted on both these with or without the wheels on the stub axles. Thus dynamic settings can be achieved. Because of its unique design the laser beam is kept well clear of the king pin arrangement and any disc brake assembly. It can also be used in conjunction with our Rear axle alignment system to provide a complete setup arrangement.

magtronic is for checking and setting the Toe, Camber and Caster angle (with the additional caster angle adapter) on most types of Kart. It has the ability to fit front stub axles with diameters from 12 to 25mm (1/2" to 1") diameter directly and larger stub axles to 50mm (1 5/8") for Gearbox or Shifter Karts with the extension set. It can so be fitted on both these with or without the wheels on the stub axles. Thus dynamic settings can be achieved. Because of its unique design the laser beam is kept well clear of the king pin arrangement and any disc brake assembly. It can also be used in conjunction with our Rear axle alignment system to provide a complete setup arrangement.

 
Specification:
Light source : Class II solid state laser Control: Multi mode Microprocessor controlled either modulated or full power
Accuracy: 0.5mm (1/32") measured at 100mm (4") from stub axle Bubble : +/- 30 arc minutes
Power: Lithium primary cell type CR2 Battery life: Sleep mode up to 5 years : Wake mode up to 70 hours continuous use
Operation: Short press for low power, long press for full power, one press for OFF, auto OFF after about 8.5 minutes
Axle sizes: 12 to 40mm (1/2" to 1 5/8") or up to 50mm (2") with additional extension set)
Material: High grade Billet Aluminium Weight: Each unit weighs approximately 225gm (0.5lb). Kit weighs 700gm (1.6lb)
 
: *
: *
: *