Home :: Exhaust :: Exhaust Springs, Mounts, Cradles, etc.

Exhaust Springs, Mounts, Cradles, etc.

Products

Akrapovic Rubber Isolated Exhaust Spring - 60mm
BY FAR the best exhaust springs available. High quality stainless steel, swiveled ends, rubber isolated to keep springs from vibrating and breaking from fatigue. Fatigue from vibration is the main cause is spring failure. Measured on the inside of the hook, un-stretched, 60mm End to End. Sold individually. Note: 80mm spring shown.
$4.50
Qty
Akrapovic Rubber Isolated Exhaust Spring - 80mm
BY FAR the best exhaust springs available. High quality stainless steel, swiveled ends, rubber isolated to keep springs from vibrating and breaking from fatigue. Fatigue from vibration is the main cause is spring failure. Measured on the inside of the hook, un-stretched, 80mm End to End. Works perfect on RCE T3 and RLV R2/R4 pipes. Sold individually.
$4.50
Qty
Grey Rubber Isolated Exhaust Spring
Swiveled ends, stainless steel and rubber isolated to keep springs from vibrating and breaking from fatigue. Fatigue from vibration is the main cause is spring failure. Springs are measured "hook to hook" and stretch approximately 25-30%. Depending on the size, springs are branded M4 or Yoshimura. Sold individually.
$4.50
Select Length
Qty
#4 Rotax Exhaust Spring - 66mm - BLACK
Factory OEM Rotax exhaust spring.
$4.95
Qty
Moose Stainless Steel Swivel-End Exhaust Spring (2 springs)

Features

  • Available in 60, 63, 67, 70, 75, 83, 85mm
  • Stainless steel construction gives superior strength and appearance
  • Swivel hook design eliminates binding, extending spring life
  • Available for most late-model 2-stroke and 4-stroke models
  • Sold in pairs
  • Made in the U.S.A.

 

$14.50
Length
Qty
RR Silencer Spring w/ Finger Hook
Heavy duty, double swiveled ends with finger hook. Perfect for Parilla Leopards, PRD Fireballs, or any engine with similar pipe configurations. 135mm length, hook to hook, unstretched.
$5.95
Select
Qty
RLV Exhaust Spring - 115mm
115mm, about 4.5" end to end (Un-stretched). Used on silencers and pipe cradles.
$2.95
Qty
RLV Exhaust Spring - 45mm
45mm, about 1.75" end to end (Un-stretched).
$1.95
Qty
RLV Exhaust Spring - 52mm
52mm, about 2" end to end (Un-stretched).
$1.95
Qty
RLV Exhaust Spring - 65mm
65mm, about 2.5" end to end (Un-stretched).
$1.95
Qty
RLV Exhaust Spring - 85mm
85mm, about 3.25" end to end (Un-stretched).
$2.50
Qty
Brake & Throttle Pedal Spring
70mm hook to hook, unstretched.
$1.95
Qty
Hegar R4 & SK-1 Pipe & Silencer Mount Kit
The Hegar mount is the hottest pipe mount. Front and rear brackets and stainless steel cradles ready to install on your spec Honda CR 125. Fits the RLV R4 or the SKUSA Pro Circuit SK-1 pipe.
$92.50
Select Year Cylinder
Qty
Maier Manufacturing HEAT SHIELD 12X12
Perfect to protect plastic CIK rear bumpers from exhaust. Features an aluminized fiberglass insulating tape that has an adhesive on one side and aluminized fiberglass insulating tape on the other, to protect your plastic side panels, engine air scoops, etc. from exhaust pipe heat. Heat shield is capable of with standing 400 degrees constant heat of 500 degrees intermittent heat.
$15.95
Qty
Musgrave Silencer Mount
We cut and modify the Hegar Silencer mount so that it will fit perfectly onto both an ’01 & ’99 engine package (simply by moving the stack of spacers underneath the cradle). This is what we use on all of our engines.
$46.95
Qty
Musgrave SK-1 Pipe Mount
The New Pipe Mount for the SKUSA SK-1 Pipe! Designed with 2 mounting points on the pipe to further reduce the harsh vibrations that lead to cracks and failures. Being mounted through the engine cases, it is the safest and strongest location to support the weight and vibrations of the pipe. The mount has been intentionally designed to extend the life of all SKUSA SK-1 Pipes and to mount perfectly to a SKUSA-legal Spec Honda CR125 Engine Package.
$49.95
Select Year
Qty
RLV Silencer Cradle Kit (Shifter style)
RLV silencer bracket kit includes flat bracket, cradle, clamps and hardware. Typically used on a CR80/CR125 shifter kart.
$17.95
Qty
Universal Exhaust Cradle Mount
Perfect for mouning a TaG, HPV, KT100 exhaust to a kart that uses a plastic CIK extended bumper.
$53.95
Frame Diameter
Color
Qty
RLV #0546 Bumper Mount
Made of anodized aluminum. Used to mount any silencer to the rear bumper. Fits 3/4" & 20mm bumpers.
$29.95
Qty
RLV Silencer Cradle Kit (TAG style)
2 springs and hardware included. Fits ICC, Parilla Leopard, PRD, etc.
$16.95
Qty
Honda Rubber Isolator Mount #18355-KZ3-B00
Perfect for fuel pumps, pipes, silencers, coils, etc.
$13.95
Qty
Silencer / Pipe Coupler
Keeps the gap sealed between the pipe and silencer. Works with RLV & RCE silencers.
$12.95
Qty
M4 Silencer Packing w/ Rivets
Original M4 "Hi-tech Continuous Roving" packing silencer exhaust packing with stainless rivets. Enough for one silencer.
$28.95
Qty
Moose Racing Competition Silencer / Muffler Packing
MOOSE RACING COMPETITION MUFFLER PACKING
  • The best low-weight, high-quality packing on the market
  • 25% lighter than stock packing
  • Quieter and longer lasting than fiberglass packing
  • Works with RCE, RLV, M4 and other silencers
  • Made in the USA
  • 250 & 500 gram kits available
    • 250 grams for silencers up to 12"
    • 500 grams for silencers 12" & up
$15.95
Select Size
Qty
Pro Circuit Silencer / Muffler Packing
Fiber matertial is encased in a pillow-like bag for easy packing. Each silencer packing kit includes all the packing and hardware needed to keep you bike running at its very best and quiet. Works with any 12" length silencer.
$17.95
Qty
Alden Racing Silencer Packing
High temp silencer packing for Alden Racing A3 silencers.
$14.00
Select
Qty