Home :: Carb/Intake/Fuel Accessories :: Fuel Line, Filters & Accessories

Fuel Line, Filters & Accessories

Products

1/4" Yellow Fuel Line (per foot)
Our favorite and least expensive fuel line. High quality, NON-hardening, fuel line. Guaranteed not to harden even over a full season of use!
$1.50
Qty
1/4" Blue Polyurethane Fuel Line (per foot)
1/4" high quality transparent blue Polyurethane hose.
$1.75
Qty
1/4" Clear Tygothane Fuel Line (per foot)
High quality, CLEAR fuel line. Slightly stiffer than the yellow stuff. Good for both fuel and pulse lines. (Sold per foot)
$2.00
Qty
974529 Rotax Fuel Line, 6x9mm
OEM Rotax Fuel Line. Not actual picture shown. Sold by the foot or 8_ft section.
$2.25
Select
Qty
Freeline Fuel Line 6x9mm (per foot)
Birel / Freeline high quality, CLEAR fuel line. Slightly stiffer than the yellow stuff. Good for both fuel and pulse lines. (Sold per foot)
$2.00
Qty
3/16" Yellow Fuel/Vent Line (per foot)
Recommended as a supply line to Mikuni TM28 carb that use a smaller inlet. Also used as Vent line for Keihin PWM & PWK carbs. High quality, NON-hardening, fuel line. Guaranteed not to harden even over a full season of use!
$1.50
Qty
3/16" Blue Polyurethane Fuel Line (per foot)
3/16" high quality transparent blue Polyurethane hose.
$1.75
Qty
1/8" Vent Line (per foot)
High quality, NON-hardening, vent line for smaller carbs, i.e. Mikuni TM28, Keihin PE68, etc. Guaranteed not to harden even over a full season of use!
$0.80
Qty
CV4 Fuel Line Sleeve - 36"
  • Perfect for 1/4" fuel line
  • At least 90 percent of the energy from radiant heat is reflected away from valuable fluid transfer lines
  • Great for fuel lines, oil lines, coolant lines and any other place radiant heat may affect performance
  • $14.95
    Qty
    Double Wire Fuel Line Clamps (10-Pack)
    Resusable clamps for fuel line, pulse line, etc. Works with 1/4" or 3/16" fuel and pulse line. (10-pack)
    $3.75
    Qty
    Drum Style Fuel Filter - 1/4" (OEM Rotax)
    OEM Rotax filter. Also good for 4-cycles that could use finer filtration.
     
  • 1/4" inlet & outlet
  • OEM Rotax fuel filter
  • High-impact nylon housings
  • Sonically welded for no-leak, no-break performance
  • Gravity flow rate of 7.6 gallons per hour compared to typical in-line filters with 2 to 4.5 gallons per hour
  • High quality fuel filter for any 1/4" fuel line
  • $5.95
    Qty
    Pancake Style Fuel Filter - 1/4"
    1/4" stainless screen fuel filter for all applications. Most durable and easy to clean out. Sold individually.
    $4.95
    Qty
    Walbro Style Fuel Filter - 1/4"
    1/4" clear plastic, nylon screen fuel filter for all applications. Sold individually.
    $3.50
    Qty
    2-Channel Fuel Line Clip
    Secure the Supply & Return line on shifter karts to the seat, floorpan or anywhere neccesary. Fuel line is secured in place and eliminates any chance of the fuel line getting pinched. Fit's 3/16 to 1/4" fuel line. Hardware included to mount to the seat. Black Only.
    $2.75
    Qty
    Motion Pro Fuel Shut-Off Valve with Knob - 5/16"
    Works great for regulating fuel or when storing karts vertically to keep the fuel from siphoning out of the tank.
    $15.95
    Qty
    Motion Pro Fuel Shut-Off Valve with Lever - 1/4"
    Works great for regulating fuel or when storing karts vertically to keep the fuel from siphoning out of the tank.
    $15.95
    Qty
    1/4" Fuel Line Wye - Brass
    High quality brass single-barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.
    $7.95
    Qty
    1/4" Fuel Line Wye - Polypropylene
    Polypropylene has good chemical resistance but is not as strong or impact and abrasion resistant as nylon and PVDF. Single-barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.
    $3.50
    Qty
    1/4" Fuel Line Tee - Brass
    High quality brass single-barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.
    $7.95
    Qty
    1/4" Fuel Line Tee - Polypropylene
    Polypropylene has good chemical resistance but is not as strong or impact and abrasion resistant as nylon and PVDF. Single-barbed fittings minimize leaks by having a smoother sealing surface than multi-barbed fittings.
    $2.50
    Qty
    Honda Fuel Line Tee w/ Ball Check Valve
    Honda tee with ball check valve, originally from the old Honda Odyssey. Perfect to reduce the pressure on the needle and seat.
    $19.95
    Qty
    NAPA Gold Fuel Filter - (For Gravity Feed)
    Similar to what some called a Trackmagic "Magic Can" back in the day. An alternative to a pump around or higher dollar fuel systems. Supply and return line for the upper nipple and lower nipple goes straight to carb. Perfect to reduce the pressure on the needle and seat. NOTE: FRAM equivalent filter shown.
    $9.95
    Qty
    Bike-Master Measuring Cup with Lid
    •Make sure it's right every time
    •Made from tough, flexible materials
    •Includes a lid to keep dust and dirt out
    •More stable when filled with oil
    •Ratios from 8:1 all the way to 70:1
    •Shows as percentage of mix
    •Graduations in gallons, fluid ounces, liters, and milliliters
    $5.50
    Qty
    Ratio-Rite Lid
    Keep the dust out with the Ratio-Rite Lid.
    $2.95
    Qty
    Ratio-Rite Measuring Cup
    Getting the right oil-to-gas ratio is no problem with this tough polypropylene cup. Just fill the cup with oil to the ratio level desired, and mix with gasoline. Ratios from 16:1 to 50:1. Graduated in ounces and CCs for filling chain cases, etc. 18-ounce capacity.
    $4.95
    Optional Lid:
    Qty
    Fuel Siphon - Hand Pump
    We've tried them all...this is the BEST! Integrated valve to keep fuel flowing in one direction. Extremely easy to use with good transfer rate.
    $12.95
    Qty