- per page
This Kit contains the most common inlet springs and .005 and .010 shims to fine-tune your pop-off pressure. We recommend you use the 0-15psi Pop-Off Gauge to check and calibrate your pop-off pressure.
Original Tillotson gasket & diaphram kit for HL carbs, Leopards, PRD Fireball, etc.
Original Tillotson gasket & diaphram kit for HL carbs, Leopards, PRD Fireball, etc. Includes slightly thinner 0.004 snake skin for better performance.
Complete Rebuild Kit for Tillotson HW-31A Mini Swift Carb.
Complete Rebuild Kit for Tillotson HW-33A MKA100 Carb.
Gasket & diaphragm kit for Tillotson HW-27 used on IAME X-30 and others. Not actual picture shown.
Same diaphram that is used with the DG1-HL and RK-117 kits.
The white fuel cap is designed for gas applications only. The white cap’s plastic does not resist ethanol, methanol, or any exotic fuels. The white fuel cap does not flow as well as the blue Tillotson cap or the red EC cap. We highly recommend using the EC Red Cap for racing application especially when using methanol. In some rare cases the fuel cap may be part of tech, check with your rulebook before ordering.
The fuel inlet caps are universal with Tillotson carburetors and work on HL, HW, HR, HB, HM, HD, HX Model Carburetors.
91A-251 OE Tillotson White Fuel Inlet/Strainer Cover comes stock on: HL-129E, HL-132H, HL-166B, HL-166C, HL-189F, HL-227E, HL-229A, HL-229F, HL-231E, HL-232E, HL-274E, HL-292G, HL-299E, HL-299G, HL-304E, HL-304WX, HL-324A, HL-352A, HL-366A, HL-371A, HL-381A, HL-384A, HL-384B, HW-10A,B HW-11A,B HW-22A, HW-23A, HW-27A, HW-30A, HW-31A, HW-32A, HW-33A, HW-34A, HW-35A, HW-43A, HB-10A, HB-11A, HB-12A, HC-102A, HC-103A,HC-112A, HM-1A, HM-2A, HM-12A, HX-10A, HX-12A
This cap can be used for gas or methanol applications. We suggest using the factory cap at a minimum but if your rules allow we recommend using our EC Red Cap for the best flow and cap strength of the plastic cap. If you want a shatterproof fuel cap we also have our EC Billet fuel cap. Check your rules and carburetor listing before ordering
91A-351 OE Tillotson Blue Fuel Inlet/Strainer Cover are universal fitment with Tillotson carburetors and work on HL, HW, HR, HB, HM, HD, HX Model Carburetors.
For X30, Leopard, Fireball, Tillotson HL, HW carbs.
For X30, Leopard, Fireball, Tillotson HL, HW carbs.
For X30, Leopard, Fireball, Tillotson HL, HW carbs.
For X30, Leopard, Fireball, Tillotson HL, HW carbs.
For X30, Leopard, Fireball, Tillotson HL, HW carbs.
Leopard throttle shaft shaft and HL Tillotson carbs.
- per page
