Home :: Products Map

Products Map

# ( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z #


Frame Guard - Donut Style
SKU: guardsmall28mm
This is the smaller / thinner version of the Disc Saver. More clearance to run the chassis in the low position. 15mm (0.6") thick - Will keep the chassis off the ground by this amount.
$8.95
Qty
Freeline Fuel Line 6x9mm (per foot)
SKU: SKU18981
Birel / Freeline high quality, CLEAR fuel line. Slightly stiffer than the yellow stuff. Good for both fuel and pulse lines. (Sold per foot)
$2.50
Qty
FreeM Brave Aluminum Rib Protector
SKU: FREEMALUMINUM1
This is the first and the only original BRAVE line, the most technological advanced, manufactured in a special sandwich of composite materials that introduce the concept of dynamic protection. Not only passive protection but also a true dynamic protection in which drivers won’t lose sensibility. Remove all elements of strict closure and dangerous to the safety of the pilot in case of impact.
$169.95
Qty
FreeM Brave Carbon Rib Protector
SKU: SKU25891
FreeM Brave Carbon RC, the most technological advanced, manufactured in a special sandwich of materials that introduce the concept of dynamic protection. Not only the passive protection from strokes, rubbing and acceleration, but a "second skin" which returns to the pilot greater sensitivity in the guide. Remove all elements of strict closure and dangerous to the safety of the pilot in case of impact.
$244.95
Qty
FreeM Neck Brace - Black Adult
SKU: SKU2482
Light Weight FreeM neck brace. Double velcro straps to secure. Made in Italy.
$64.95
Qty
FreeM Rhino Chest Protector - Kids
SKU: FREEMRHINO
The Rhino is a central chest protector that compliments the Brave rib protector to provide additional coverage. Check rules for legality.
$47.00
Qty
FreeM Road Runner Neck Brace (Jr.1 / Cadet)
SKU: FREEMRR

Designed for young drivers from 4 to 11 yrs (Jr.1 / Cadet) with a shock-absorber technology to reduce possible injuries in case of impact. CLICK FOR VIDEO. Made in Italy.

$180.00
Qty
FreeM Seat Padding - Black
SKU: SKU44430

FreeM high density foam pads have a 3M adhesive backing for easy installation. 3/8" thick. Removable cutouts for easy access to mounting hardware. Two pads included.

$23.95
Qty
FreeM Steering Wheel for Mychron 4/5 & Alfano Astro/Pro - (3 & 6-bolt pattern)
SKU: SKU5013612

Fits the latest Mychron 5 gauge as well as Mychron 4 and Alfano Astro/Pro. Drilled for standard 3-bolt or OTK/Tony 6-bolt hub. The most advanced patented technology applied to karting drive, known as E.D.C. (Ergo Concept Driving) for its important performance. This product is born of a study on ergonomic driving, was developed in collaboration with teams and drivers that after months of tests have provided the correct input for the development of the product. The its forms and innovative ergonomics allow the pilot to concentrate more on the race reducing the effort into the pilot. Features: Structure aero-space aluminum high level resistance Studied ergonomics, geometry patented Less effort and more sensitivity and precision in the driving Double position fixing Compatibility of the structure : may fit Alfano Astro – Pro and Aim Micron 3 – 4 Material structure in bi-component foam with high factor vibro-absorber. Quick drying of the coated microfiber after a rain (avoids the sponge effect) These are strengths points that allow the wheel to be a step ahead of everything that is currently offered on the in karting market. Dimenionsions: Upper Grip: 10-3/4”, Mid Grip: 12.5”, Lower Grip: 12-1/4”, Top to bottom: 11”

$188.95
Qty
Freem Touch 2 Gloves - BLACK
SKU: SKU70481
-
$83.95
Market price: $99.95 save 16%
Qty
FRIXA Tony Kart Pads (SA2/BS3-7) - Front or Rear (Includes shipping)
SKU: FPTK01-2

Frixa High Performance Brakes are designed with meticulously high standards by their “human professionals” and not computerization or simulation methods. Their brake specialists design a real world pad with increased braking performance, better stability and less pedal fade. Frixa manufactures ev...

$56.95
Qty
FRIXA Tony Kart Pads - BSD
SKU: FRIXA_BSD

Frixa High Performance Brakes are designed with meticulously high standards by their “human professionals” and not computerization or simulation methods. Their brake specialists design a real world pad with increased braking performance, better stability and less pedal fade. Only Medium Compound available.

$51.95
Qty
FTP "Floating" Rear Bumper Bolt - Intrepid, Praga, Italkart (Sold individually) - STEEL
SKU: SKU26138
Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread. Save 50% on 10-pack of SALE price!
$7.25
Market price: $17.95 save 60%
Qty
FTP "Floating" Rear Bumper Bolt - NEW STYLE (Sold individually) - TITANIUM
SKU: SKU50326
Only 61g/2.2oz...about half the weight of the steel equivalent bolt. Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
$32.95
Qty
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - STEEL
SKU: SKU16568

The FTP "Floating" bumper bolt kit allows the rear bumper mount to float and not bind on the hardware. No need for additional backup mounts, cables, etc. or the need to run the mounts sloppy loose to free up the kart. No special tools needed. Fits most karts, CRG, OTK, Tony, Kosmic, Intrepid, Praga, OK1, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.

$19.95
Market price: $25.95 save 23%
Qty
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
SKU: SKU50361

Saves nearly 1/4 pound when replacing the steel hardware. This new unique style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts including CRG, OTK, Tony, IPK, Praga, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.

$47.95
Qty
FTP #428 Split Aluminum Gears (7075-T6-HQ) - 50mm
SKU: SKU83505

Not your cheap average Chinese split gears! High quality, CNC'ed #428 split sprockets out of the highest quality Ergal 7075-T6 Heat Treated aluminum. Made in Europe.

$39.95
Qty
FTP #428 Split Gears - Steel - 50mm - SQ
SKU: SKU1607
Standard Quality steel split gears. Includes setscrew to secure the key.
$31.95
Qty
FTP / Motion Pro Clutch Cable Kit - CR125
SKU: SKU40297

High quality Motion Pro clutch cable kit with Teflon lined housing. Cable stop NOT included. 60" overall housing length.

$37.95
Qty Out of stock
Click here to subscribe for 'Back-in-stock' notifications
FTP / Motion Pro Clutch Cable Kit - ROK Shifter
SKU: SKU402972

High quality Motion Pro clutch cable kit with Teflon lined housing. Cable stop NOT included. Includes clevis fork to attach to engine clutch lever. 56" overall housing length.

$43.95
Qty
FTP / Motion Pro Clutch Cable Kit - TM / KZ / CR80
SKU: SKU402971

High quality Motion Pro clutch cable kit with Teflon lined housing. Cable stop NOT included. 56" overall housing length. Fits TM KZ and CR80/85 engines.

$37.95
Qty
FTP 428 Split Gears - Steel - 40mm
SKU: SKU36746
High quality split steel #428 gears.
$44.95
Qty
FTP 5 Degree Steering Wedge (For 6-Hole OTK/Tony and 3-Hole Standard Hub)
SKU: SKU637561

Anodized black, CNC aluminum. Fits standard 3-bolt and OTK 6-bolt (Tony, Kosmic, FA Karts). Hardware Not included.

$10.95
Qty
FTP Adjustable Caster Adjuster Wrench
SKU: SKU23391

Adjustable caster wrench works with any caster camber pills with 2 or more holes. Constructed of steel, 6.5" overall length with 3mm pegs (small enough to fit any caster pill).

$29.95
Qty
FTP Adjustable Radiator Shroud
SKU: SKU26557
Easily adjust the cooling capacity. No more taping the radiator with this. Only fits the 16x10" FTP Radiator. NOTE: Only fits the 16x10" & 18x10" radiators. Radiator not included.
$98.95
Qty
FTP Aluminum Bead Locks (6-pack)
SKU: SKU13691

FTP knurled aluminum beadlocks, standard 5mm thread w/ 4mm allen head. 12mm overall diameter, 7mm height (not including threads). O-ring included.

$11.95
Qty
FTP Aluminum Dellorto Jet Storage Block
SKU: FTP-JH

High quality CNC'ed aluminum Dellorto jet block holds 21 main jets, 7 External Pilots and 7 Internal pilot jets (Jets not included). Conveniently mount the block to the toolbox with the magnet located on back of the block.

$32.95
Qty
FTP Aluminum Front Hub - BLACK - 17mm Bearing
SKU: SKU129471

High quality aluminum hubs with 17mm bearings with 3x58mm international bolt pattern. Sold individually.

$31.85
Market price: $45.95 save 31%
Qty
FTP Aluminum Front Hub - BLACK - 25mm Bearings
SKU: SKU464361

High quality aluminum hubs with 25mm bearings with 3x58mm international bolt pattern. Sold individually.

$34.25
Market price: $48.95 save 30%
Qty
FTP Aluminum Motor Mount Clamp
SKU: SKU39195

CNC'ed aluminum. Sold individually.

$15.95
Qty