Rear Brake Group

Products

Banjo Style Brake Line w/ 45 & 90 Degree Ends
SKU: SKU6682
Rear brake line for brakes that use Banjo hardware. Measured overall length, end to end.
$35.00
Market price: $50.00 save 30%
Select Length
Qty
Banjo Style Brake Line, 45mm
SKU: SKU66822

Jumper brake line, 45mm overall length, for brakes that use Banjo hardware. Measured overall length, end to end.

$12.60
Market price: $18.00 save 30%
Select Length
Qty
Intrepid 2015+ Rear Pads - Racing Carbon Red
SKU: 5401S
Fits 2015+ Intrepid. L:65.0mm, H:43.6mm, TH:12.0mm
$29.95
Qty
ItalKart / Intrepid / Praga - R1 / EVO8 / EVO10 Rear Pads - GREEN
SKU: SKU59458
Fits the Praga, Intrepid R1 / EVO8 and Italkart EVO10 rear caliper. L:80.0mm, H:46.2mm, TH:13.0mm, Commonly used on Ceramic brake discs.
$29.95
Qty
ItalKart / Intrepid / Praga - R1 / EVO8 / EVO10 Rear Pads - FERODO
SKU: 5203.KA
Fits the Intrepid R1 / EVO8 and Italkart EVO10 rear caliper. L:80.0mm, H:46.2mm, TH:13.0mm
$29.95
Qty
ItalKart / Intrepid / Praga - R1 / EVO8 / EVO10 Rear Pads - Racing Carbon Red
SKU: 5203.S
Fits the Intrepid R1 / EVO8 and Italkart EVO10 rear caliper. L:80.0mm, H:46.2mm, TH:13.0mm
$29.95
Qty
ItalKart / Intrepid / Praga - R1 / EVO8 / EVO10 Rear Pads - Racing Carbon Red (CLONE)
SKU: 5203.S1
Fits the Intrepid R1 / EVO8 and Italkart EVO10 rear caliper. L:80.0mm, H:46.2mm, TH:13.0mm
$29.95
Qty
Praga / Italkart / Intrepid R1 Rear Caliper w/ Mount
Praga / Italkart / Intrepid R1 Rear Caliper w/ Mount
SKU: R1_REAR_CAL
Complete IPK R1 rear caliper with mount for Praga / Italkart / Intrepid karts. Pads, Banjo bolts/washers included. Fits 14-18mm disc.
$209.95
Qty
Praga 2015+ Rear Pads - Racing Carbon Red
SKU: 5409S
Fits 2015+ Praga. L:60.0mm, H:39.0mm, TH:12.0mm
$29.95
Qty
ItalKart / Intrepid EVO3 Front/Rear Pads - Sinter Black
SKU: 5245.BLACK

Fits Italkart, Intrepids and Topkarts. For front caliper or dual rear caliper. Medium Compound. (Enough for 1-caliper)

$19.95
Market price: $29.95 save 33%
Qty
ItalKart / Intrepid EVO3 Front/Rear Pads - Sinter Red
SKU: 5245.S

Fits Italkart, Intrepids and Topkarts. For front caliper or dual rear caliper. (Enough for 1-caliper)

$22.50
Market price: $29.95 save 25%
Qty
Intrepid EVO3-ET Stock Rear Pads - Red
SKU: 5271.S
Larger style EVO3-ET caliper. The latest racing compound from Sinter. Excellent initial bite, less prone to glazing and more consistent performance. Fits Intrepid and Topkart brakes. (Enough for 1-caliper)
$22.50
Market price: $29.95 save 25%
Qty
SKM EVO1 Rear Pads - Sinter Black
SKU: 5181.BLACK
SKM pads fit the Intrepids & Italkarts with the EVO1 Caliper and most Emmicks, Alphas and any kart with the SKM Caliper. Sinter Black medium compound. (Enough for 1-caliper)
$19.95
Market price: $29.95 save 33%
Qty
SKM EVO1 Rear Pads - Sinter Red
SKU: 5181.S
SKM pads fit the Intrepids & Italkarts with the EVO1 Caliper and most Emmicks, Alphas and any kart with the SKM Caliper. Sinter Red 222 compound. (Enough for 1-caliper)
$22.50
Qty
Righetti Brake Shim (0.5mm) - Rear (Sold Individually) - Fits, SKM, Wildkart & Old Birel brakes
SKU: SKU40480

Fits, SKM, Wildkart & Old Birel brakes.

$3.00
Qty
Brake Pad Hardware with Sleeve & Spring - REAR (Set of 4)
SKU: SKU2445
Fits most karts that have a shimming type caliper and has a 6mm threaded hole in the back of the pad. Fits SKM, Italkart, Intrepid, Avanti, Righetti calipers and more. Exposed thread is 6mm in length, 23mm sleeve, 19mm spring. Set of 4, enough for one caliper.
$19.95
Qty
Italkart / Intrepid Brake Rotor Bushing (For 3-pin Rotor) - 14mm (3-pack)
SKU: SKU1101
Fits the old 190x12mm Drilled & Vented stock Italkart / Intrepid 3-Pin rotor. Brake Rotor Hardware Assembly - 3 Point Floating. Kit comes with three each of washer, bolt/pin (19x14mm), circlip, safety clip.
$36.95
Qty
Italkart /Intrepid Brake Rotor Bushing (For 6-pin Rotor) - 10mm (6-pack)
SKU: SKU2405
Brake Rotor Hardware Assembly - 6 Point Floating. Kit comes with six each of washer, bolt/pin (17x0mm), circlip, safety clip.
$54.95
Qty
Righetti Ridolfi Rear Caliper (Brake pads included)
SKU: K879

Direct replacement for the SKM EVO1 caliper that is no longer available. Same overall design with four pistons (2x19mm, 2x22mm), 10mm mounting holes and the same spacing, 60mm On-Center, CNC'ed aluminum. Brake pads included.

$169.95
Select Color
Qty
26mm Square Caliper Seal (Italkart / Intrepid EVO3 & EVO4 Calipers)
SKU: SKU1468
Fits Italkart & Intrepid EVO3 & EVO4 Calipers.
$12.00
Qty