Rear Bumpers

Rear Bumpers and accessories.

Products

FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - STEEL
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - STEEL
SKU: SKU16568

The FTP "Floating" bumper bolt kit allows the rear bumper mount to float and not bind on the hardware. No need for additional backup mounts, cables, etc. or the need to run the mounts sloppy loose to free up the kart. No special tools needed. Fits most karts, CRG, OTK, Tony, Kosmic, Intrepid, Praga, OK1, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.

$19.95
Market price: $25.95 save 23%
Select Frame Outer Diameter
Select Bumper Mount Insert
Qty
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
SKU: SKU50361

Saves nearly 1/4 pound when replacing the steel hardware. This new unique style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts including CRG, OTK, Tony, IPK, Praga, etc. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.

$47.95
Select Frame Outer Diameter
Select Bumper Mount Insert
Qty
FTP "Floating" Rear Bumper Bolt - Intrepid, Praga, Italkart (Sold individually) - STEEL
FTP "Floating" Rear Bumper Bolt - Intrepid, Praga, Italkart (Sold individually) - STEEL
SKU: SKU26138
Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread. Save 50% on 10-pack of SALE price!
$7.25
Market price: $17.95 save 60%
Quantity Discount
Qty
FTP "Floating" Rear Bumper Bolt - NEW STYLE (Sold individually) - TITANIUM
FTP "Floating" Rear Bumper Bolt - NEW STYLE (Sold individually) - TITANIUM
SKU: SKU50326
Only 61g/2.2oz...about half the weight of the steel equivalent bolt. Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
$32.95
Qty
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
SKU: SKU71505
Ultra lightweight at about 7oz/198g per side, saving a total of 13oz/369g (over 3/4 pound) in the brackets only! Fits KG, Italkart, Intrepid, Praga, OTK, Tony, Kosmic, FA, CRG/KG and others. 1-Pair, 2 mounts included.
 
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
 
 
One pair included.
$249.95
Qty
KG / OTK Rear Bumper Mount (Aftermarket)
KG / OTK Rear Bumper Mount (Aftermarket)
SKU: SKU11944
Aftermarket bumper Mount for KG and OTK/Tony rear bumpers.
$54.95
Qty
KG Rear Bumper Mount (Made by KG) - CIK Homologated
KG Rear Bumper Mount (Made by KG) - CIK Homologated
SKU: AT.011
Homologated KG rear bumper mount fits all KG CIK plastic rear bumpers.
$67.95
Qty
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper
SKU: KA625
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper features a unique "quick release" function that allows eay removal of the rear bumper. Also fits OTK & KG bumpers...or any bumper that has a 60mm channel for the mounting bracket.
$59.95
Qty
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper - TITANIUM
Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper - TITANIUM
SKU: KA625_TI

Full titanium version of the Righetti rear bumper mount. Tubular section is half the weight, triangular mount 100% GR2 welded titanium, will not break like the original composite mount. 1-Pair, 2 mounts included with hardware.

NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.

We recommend the FTP "Floating" Bumper Hardware, Click Here

Righetti Ridolfi Mounting Kit for XTR14 Rear Bumper features a unique "quick release" function that allows eay removal of the rear bumper. Also fits OTK & KG bumpers...or any bumper that has a 60mm channel for the mounting bracket.

$187.00
Market price: $219.95 save 15%
Qty
FTP Bumper Rubber - 10x1.5mm Thread Size
FTP Bumper Rubber - 10x1.5mm Thread Size
SKU: SKU49718

Bumper rubber w/ 10mm hole. Includes M10x1.5 flanged nut. Sold Individually.

$6.95
Select Frame Outer Diameter
Qty
Loop Strap - 16mm
Loop Strap - 16mm
SKU: SKU3536
Used to mount Stilo bodywork to aluminum support bar. Metal loops with rubber isolator. Sold individually.
$0.95
Qty
Nylon Rear Bumper Insert
Nylon Rear Bumper Insert
SKU: SKU261381

Nylon rear bumper insert for Praga, Italkart, Intrepid, OK1, FTP bolt kits, RLV/KG and Righetti bumper mounts, etc. Color may vary between white, grey or black. Sold individually. 

$3.95
Quantity Discount
Qty