Home :: Engine Parts :: Engine Mounts :: Engine Mounts - Shifter (Moto, ICC, KZ)

Engine Mounts - Shifter (Moto, ICC, KZ)

Products

SharkShifter CR125 Engine Mount (Clamps included)
The Sharkshifter Adjustable CR125 Engine mount offers the following features.
 * Anodized 6061 T6 Aluminum Alloy Engine mount
 * Chassis clamps designed for 1 bolt per clamp
 * Adjust the engine from left to right for proper clearance approximately 6mm to the left and 12mm right from center More adjustment then any other mount
 *Engine Mount sits the rear of the engine up to 1" lower most other mounts
 - Hardware securing engine to the mount is the proper sizes to match the Honda Cases 10mm front case bolt 12 mm rear case bolt with proper thru case Machined Alum Spacers
 * Proper machining from front to back, engine will not be twisted when mounted to a straight frame.
 * Proper radius on frame contact point
 * Left side of rear engine mount machined to allow for chassis cross tubing weld clearance.You will not find a better motor mount . With the Sharkshifter factory Pricing. $199.00


 This is only a reference, for some chassis below. Contact your chassis Supplier for proper frame rail sizes.
 CRG, GP, Zanardi, DR, Aluminos, Maranello - 90mm spacing
 Tony, Kosmic, FA, Italkart, Intrepid, Arrow, Praga, Birel , ART: 92mm spacing
$199.00
Frame Spacing
Qty
KVR CR125 Engine Mount
KVR mounts are made of lightweight, TIG welded, yellow zinc plated, 4130 chromoly.
$209.95
Market price: $244.95 save 14%
Frame Spacing
Qty
Swedetech CR125 Engine Mount (Clamps included)
The latest mount from Swedetech Racing Engines. Lightweight, CNC'ed & anodized aluminum. Ligntening holes and cut-outs throughout to reduce weight. Adjustable engine offset. Clamps included.
$249.99
Frame Spacing
Qty
Alden Honda CR80 Mount
Alden Honda CR80 Mount
Alden mounts allows for a low engine position and more adjustment travel. The powder coating provides and attractive low maintenance finish. Frame spacing is universal for both 90 and 92mm.
$199.00
Select Size
Qty
AMC CR80 Motor Mount
Universal design and Made in the USA. Clamps included.
$229.95
Select Frame Spacing
Qty
FTP Magnesium Engine Mount for TM ICC/KZ (KZ10)
FTP Magnesium Engine Mount for TM ICC/KZ (KZ10)
Lightweight magnesium engine mount to fit TM KZ10 and KZ10B engines. Two aluminum clamps included. NOTE: Will not fit K9 series engines. 1118g or 36oz with clamps and bolts.
$189.95
Frame Spacing
Qty
Alden Honda CR250 Mount
Alden Honda CR250 Mount
Alden mounts allows for a low engine position and more adjustment travel. One design fits 30/32 and 90/92 karts. The powder coating provides and attractive low maintenance finish.
$224.95
Qty
Swedetech Motor Mount Clamp
Swedetech Motor Mount Clamp
Replacement Swedetech aluminum engine clamps. Sold separately.
$15.95
Select Diameter and Spacing
Qty
FTP Aluminum Motor Mount Clamp
CNC'ed aluminum. Sold individually.
$15.95
Select Size
Qty
KVR Motor Mount Clamps (1-Pair)
Fits both KVR and PSR mounts. 2 clamps & hardware included.
$64.95
Select
Qty
Prospeed Motor Mount Clamp
Also used on the Prospeed pipe mounts. Sold individually.
$13.95
Select Size
Qty
Red Rubber Engine Mount Stop
10x1.5mm thread, 110mm overall Length.
$14.95
Qty
Shockwave Motor Mount Clamp (1-pair, 2 clamps)
Crafted from 6061 aluminum alloy, our motor mount clamps tighten flush with the bottom of the frame rails for secure mounting without the risk of being scraped off due to curbing or off-track adventures. Clamps are included with all Shockwave motor mounts, but these replacement clamps are compatible with virtually all motor mounts. Sold individually.
$14.00
Select Size
Qty