Home :: TITANIUM Parts & Hardware :: Titanium Bodywork Nerfbars & Bumpers

Titanium Bodywork Nerfbars & Bumpers

Products

Titanium KG Stilo EVO Style Nerf Bars (1 Pair)
Titanium KG Stilo EVO Style Nerf Bars (1 Pair)
 
(0 reviews)  
High quality, lightweight, TIG welded titanium GR2 KG Stilo EVO nerf bars weigh in at 1 pound even per side, saving almost 2 pounds from the steel nerf bars. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. CRG owners looking to save weight (3.2# in only nerfs), simply get EVO pods which are lighter anyways and graphics fit. Fits most Intrepid, Italkart, Praga, Arrow, Topkart or any karts that use KG EVO Stilo pods. Very limited supply in stock!
$299.95
Qty
Titanium KG Style Lower Bumper Hoop
 
(0 reviews)  
High quality, lightweight, TIG welded titanium GR2 KG lower hoop weigh in at 0.4 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. Fits most karts with a removable lower hoop. Very limited supply in stock!
$79.95
Qty
Titanium KG Style Upper Bumper Hoop
Titanium KG Style Upper Bumper Hoop
 
(0 reviews)  
High quality, lightweight, TIG welded titanium GR2 KG upper hoop weigh in at 0.8 pounds, saving 0.8 pounds from the steel upper hoop. Change out both nerf bars, upper/lower front bars and save almost 3.5 pounds. Fits most karts. Very limited supply in stock!
$139.95
Qty
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
FTP TITANIUM Rear Bumper Mount (KG, Tony, Praga, CRG, Intrepid etc.)(1-Pair)
 
(0 reviews)  
Ultra lightweight at about 7oz/198g per side, saving a total of 13oz/369g (over 3/4 pound) in the brackets only! Fits KG, Italkart, Intrepid, Praga, OTK, Tony, Kosmic, FA, CRG/KG and others. 1-Pair, 2 mounts included.
 
NOTE: Mounting hole through the mount to the frame is 21mm. Some karts, including CRG with NewAge bolt hardware and centering bushings will not work. CRG with KG bumpers are OK.
 
 
One pair included.
$249.95
OPTIONAL Ti Bumper Bolt Kit
Qty
FTP "Floating" Rear Bumper Bolt - NEW STYLE (Sold individually) - TITANIUM
 
(0 reviews)  
Only 61g/2.2oz...about half the weight of the steel equivalent bolt. Direct replacement for Italkart, Intrepid, OK1, Praga or any kart that uses this style 10mm hardware. This is the latest bumper bolt with the nut at center so the bolt could be tightened independently of the bumper mount. 170mm overall length, 75mm length on the clipable end, 80mm on non-clipped end, 10x1.5mm thread.
$32.95
Qty
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
FTP "Floating" Rear Bumper Bolt Kit (Sold individually) - TITANIUM
 
(0 reviews)  
Saves nearly 1/4 pound when replacing the steel hardware. This new unique style rear bumper bolt kit allows the main bumper assembly to float free while the bolt is tight in the frame without any chance of the bumper falling out. 10mm bolt. Fits most karts. Available in 28, 30 or 32mm (Outer Diameter measurement). Sold Individually.
$47.95
Select Frame Outer Diameter
Select Bumper Mount Insert
Qty
Titanium OTK Style (Alonso, FA, Kosmic, Tony Kart) 10x130mm Rear Bumper Bolt - (Sold Individually)
 
(0 reviews)  
High quality, Grade 5, ultra lightweight titanium hardware. 47% lighter than steel, Corrosion resistant, Reduce overall weight. 45 grams (1.6 oz) each.
$17.95
Quantity Discount
Qty
Titanium Fairing Brackets, Standard (1 Pair)
 
(0 reviews)  
Titanium fairing brackets fit most karts. 2.5oz per bracket, nearly half the weight of standard steel brackets. 35-80-45mm sections, 10" overall length.
$38.95
Qty
Titanium Fairing Brackets, CRG Style (1 Pair)
 
(0 reviews)  
Titanium fairing brackets fit most karts. 3oz per bracket, nearly half the weight of standard steel brackets. 60-75-60mm sections, 12" overall length.
$48.95
Qty
Titanium Fairing Brackets, Tony/OTK Style M6 - LOWER
 
(0 reviews)  
OTK/Tony style titanium LOWER fairing for M6 bodywork saves almost 1.5oz compared to OEM steel. Get all three brackets, top and bottom and save close to 5oz.
$22.95
Qty
Titanium Fairing Brackets, Tony/OTK Style M6 - UPPER (1 Pair)
Titanium Fairing Brackets, Tony/OTK Style M6 - UPPER (1 Pair)
 
(0 reviews)  
OTK/Tony style titanium fairing brackets for M6 bodywork saves almost 4oz (1/4 lb) compared to OEM steel. Get all three brackets, top and bottom and save close to 5oz.
$48.95
Qty
Titanium OTK M6 (and KG Duo) Nerf Bar Set (Left & Right)
 
(0 reviews)  
High quality, lightweight, TIG welded titanium GR2, OTK/Tony M6 Style weigh in at 1.2 pound even per side, saving almost 2.4 pounds from the steel nerf bars. Also works with KG DUO with additional spacers.
$299.95
Qty
Titanium Tony/OTK Style M6 Lower Front Bumper Bar
Titanium Tony/OTK Style M6 Lower Front Bumper Bar
 
(0 reviews)  
OTK/Tony style titanium LOWER bumper bar w/ integrated pedal stop. 9.5 oz, nearly half the weight of OEM steel.
$129.95
Qty