Home :: Engine Parts :: TM K9 / KZ10 Parts :: TM K9 / KZ10 Piston / Crank

TM K9 / KZ10 Piston / Crank

Products

TM K9 / K9B / K9C / KZ10 / KZ10B Piston Kit (Standard Angle)
Standard angle piston. Kit includes piston, pin, two circlips and ring. (Bearing not included)
$123.95
Diameter
Qty
TM KZ10B / KZ10C Piston Kit (4 Degree)
4 degree piston for KZ10B and KZ10C. Kit includes piston, pin, two circlips and ring. (Bearing not included)
$123.95
Diameter
Qty
TM K9 / K9B / K9C / KZ10 Piston Ring
TM K9 / K9B / K9C / KZ10 Piston Ring #11056
$33.95
Qty
TM K9 / K9B / K9C / KZ10 Upper Rod Bearing #19033
TM K9 / K9B / K9C / KZ10 Upper Rod Bearing #19033
$22.95
Qty
TM Rod Assembly - K9 / K9B / K9C / KZ10 - 20mm
Includes rod, big end pin, bearing and crank washers. 20mm Pin.
$289.95
Qty
TM Rod Assembly - KZ10C - 22mm
KZ10-C rod assembly with 6mm hole in pin. Includes rod, big end pin, bearing and crank washers. 22mm pin.
$324.95
Qty
Motion Pro Torque Wrench Adapter
  • Chrome-vanadium tool steel with hard nickel pewter finish
  • Properly torque two-stroke cylinder base nuts and hard-to-reach fasteners
  • Fits 12 and 14mm nuts and bolts
  • Extends the reach of any 3/8 inch drive torque wrench by 3 inches
  • Chart supplied for torque conversions
  • Check owners manual for proper torque specifications
  • $14.95
    Qty
    Bux Circlip Tool - 14mm
    Makes installing circlips an ABSOLUTE breeze without any chance of damaging or losing the circlip! For Parilla Leopard, PRD Fireball, HPV, CR80, etc.
    $39.95
    Qty
    Bux Circlip Tool - 15mm
    Makes installing circlips an ABSOLUTE breeze without any chance of damaging or losing the circlip! For Rotax Max, Honda CR125, most 125 moto engines, TM K9, TM KZ, ICC, etc.
    $39.95
    Qty
    Parts Unlimited Piston Pin Puller
  • Universal piston pin puller
  • Aids in removing piston pins without damaging the piston
  • Aluminum anodized knurled body with black heat treaded steel rod & pullers
  • Fits 14-17mm piston pins.
  • Works with Honda CR80, CR125, TM ICC, Leopards, Rotax Max, etc.
  • $28.95
    Qty
    Flex-Hone Aluminum-Oxide Ball Hone - 48mm
    "Aluminum-oxide", 240 grit flex hones perfect for honing CR80 & CR85 cylinders. This is NOT the more common silicon-carbide hone that is not recommended for cylinder honing.
    $47.95
    Qty
    Flex-Hone Aluminum-Oxide Ball Hone - 54mm
    "Aluminum-oxide", 240 grit flex hones perfect for honing 125cc cylinders. This is NOT the more common silicon-carbide hone that is not recommended for cylinder honing. Perfect for Honda CR125's, TM ICC, Rotax Max, etc.
    $47.95
    Qty