Home :: Products Map

Products Map

# ( A B C D E F G H I J K L M N O P Q R S T U V W X Y Z #


A-60941A, Leopard Relay (for old powerpack ignition)
SKU: A-60941A

-

$20.00
Qty
A. 0014.D0 Tony Kart OTK Aluminum Adjustable Throttle Pedal
SKU: SKU3548
OTK Aluminum Throttle Pedal
$136.00
Qty
A. 0046.C0A Tony Kart OTK 25x47mm Aluminum Wheel Hub
SKU: SKU3377
25mm x 47mm Long
$89.70
Qty
A. 0103.C0CKIT Tony Kart OTK Front Hub HST 25mm Magnesium 80mm
SKU: SKU3363
For 25mm Spindle Shaft
$138.00
Qty
A. 0111.B0 Tony Kart OTK Gear Lever
SKU: SKU3675
OTK Shifter Lever
$107.95
Qty
A. 0212.00 Tony Kart OTK Bottom Bushing for M8 Bolt, 12mm
SKU: SKU3474
For 8mm Kingpin Bolt
$9.75
Qty
A. 0235.FAA Tony Kart OTK Oval Front Bar 275mm
SKU: SKU3618
OTK Flat Torsion Bar, Comes Standard in Adult Karts
$19.95
Qty
A. Tony Kart OTK Flat Bottom Seat
SKU: SKU3627
OEM Tony Kart Seat
$145.00
Qty
Accu Mix Jug
SKU: acc1
This is a "must have" item. Easily mix any amount of fluids as needed. No need to measure gallons at a time.
$34.95
Qty
Adapters for AMC Brake Bleeder
SKU: SKU37804
Brake bleeder adapters for the AMC bleeder.
$14.95
Qty
Adapters for AMC Brake Bleeder - CRG
SKU: SKU378041

For CRG karts that have master cylinders with reservoirs. 10x1.0mm thread for most gravity brake tools.

$15.95
Qty
Adjuster Bolt (for FTP Round "Adjustable" Seat Struts) - Aluminum
SKU: SKU75710
-
$12.95
Qty
Adjuster Bolt (for FTP Round "Adjustable" Seat Struts) TITANIUM
SKU: SKU75696
High quality, super strong Grade5 Titanium Adjuster Bolt for FTP Adjustable Seat Struts. The original aluminum bolts fatigue and snap over time. These titanium bolts are indestructible!
$22.95
Qty
AF "GOLD" Aluminum Radiator - 17x9.5"
SKU: AFGOLD
430x240x40 mm, TIG welded, aluminum, mount and cap included. Adjustable curtain optional.
$325.00
Qty
AF Silicone Hose w/ One 90 End - TaG, ICC, KZ (Sold individually)
SKU: SKU51678121

AF high quality hose, 16.5mm ID, 36" Length with 4" Elbow . Perfect for TaG, ICC, KZ, etc. Sold individually.

$25.17
Market price: $35.95 save 30%
Qty
AFAM / NKP #428 Split Gears - Steel - 50mm
SKU: SKU2845512

These aren't your typical Chinese steel gears. These are high quality steel split gears that close down all the way on the axle with a setscrew to secure the key. NOTE: For 18t, DID & Regina chains are too wide to fit in the machined groove in the NKP gear. We recommend the Panther or RK MXZ Chain for this one size.

$66.95
Qty
AFS.01643, CRG NA2 Rear Bumper Mount Kit
SKU: AFS.01643
For CRG NA2 plastic rear bumper that has four 6mm threaded brass inserts in the back of the bumper. Bumper bolt hardware not included. DOES NOT FIT KG. As shown in pic x2.
$60.00
Market price: $120.00 save 50%
Qty
AFS.01950, CRG Big Wheel Rolling Stand
SKU: AFS.01950

Factory CRG big wheel rolling stand.

$295.00
Qty
AFS.04360, CRG NA3 Graphics Bumper ONLY - 2018
SKU: AFS.04360

Front bumper sticker kit for full size karts.

$75.00
Qty
AFS.05202 CRG NA3 Graphics Kit Complete - 2020
SKU: AFS.05202

Complete sticker kit for full size karts.

$234.95
Qty
AFS.05223 CRG NA3 Graphics Bumper ONLY - 2020
SKU: AFS.05223
Bumper graphics only.
$74.95
Qty
AIR FILTER, 3.5x6", Angled Inlet
SKU: AFR177

Aftermarket fabric air filter with 2-7/16" ID (Standard for most 2-cycle kart engines). 20º Angle Mount, 2-7/16" ID Flange, 6" Tall, 3-1/2" Diameter. Perfect for most TAG or shifter karts that don't require an airbox.

$16.95
Qty
AIR FILTER, 3x4", 1.25" Angled Inlet (LO206 alternative filter)
SKU: 3x4_FILTER

Alternative filter for LO206. 3" diameter, 4" length, 1-1/4" angled inlet. Check rules for legality, technically not LO206 legal.

$13.95
Qty
Airbox / Filter Clamp with Thumb Screw (50-70mm)
SKU: SKU2056

Easily install and remove the airbox with this high quality, solid band, stainless clamp.

$4.95
Qty
Airbox Replacement Intake Boot
SKU: SKU1116
Fits all airboxes, i.e. RLV, Freeline, Righetti, etc.
$10.95
Qty
Alden 125cc Tunable Silencer, 1.0" Inlet, 12' Length (Shipping included!)
SKU: A3-12-125

The A3-12 125cc Short Track Silencer - Developed for increased low-mid range power for Honda Cr125 Shifter Engines. The power/ torque curve is for short tight size sprint tracks .5 - 1.0 mile. CLICK FOR MORE INFO.

$169.95
Qty
Alden 125cc Tunable Silencer, 1.0" Inlet, 14' Length (Shipping included!)
SKU: A3-14-125

The A3-14 125cc Mid Track Silencer - Developed for increased mid-range power for Honda Cr125 Shifter Engines. The power/ torque curve is for mid size sprint tracks .5 - 1.0 mile with 800 ft max straights. CLICK FOR MORE INFO.

$169.95
Qty
Alden 80cc Shifter Silencers - Tunable! (Shipping included!)
SKU: A3-8-80
The A3-8 80cc Short Track Silencer - Developed for increased low-mid range power for Honda CR80 Shifter Engines. The power/ torque curve is for short-mid size sprint tracks .5 - 1.0 mile. High quality, easily re-packable and tunable by changing out the restrictor pills. 7/8" inlet and 8.25" overall body length including end cap.
$159.95
Qty
Alden Honda CR80 / 85 Mount (Includes shipping)
SKU: SKU50985
Alden mounts allows for a low engine position and more adjustment travel. The powder coating provides and attractive low maintenance finish. Frame spacing is universal for both 90 and 92mm. Drop shipped directly from Alden.
$215.00
Qty
Alfano ADM (IR) Infrared Receiver - A1401
SKU: A1401
A1401 Infrared receiver for Box4, Box4GPS Application: Infrared receiver for lap timing Length: 37cm / 14.6inch ***Compatible only with our NEW line of: ADM, ADL, BX4, BX4GPS, BX10, BZ10.2
$108.00
Qty